Hi,
these boards were both labeled as LEX BN266A but they are only Jetway P4XFA relabeled. If you remove the label, you will se Jetway model number.
I found both of them in the trash (sorry for my English), with lots of stability problems. I decided to analyze them, maybe take off battery, flash eprom and any useful part. Cpu pwm capacitors were vented! GSC capacitors... not all were vented, but many of them. All capacitors on the board are GSC
See photos for details.
Only the 1500uF 6.3V seem bad, they're vented.
All other capacitors in the board, also the...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: ABIT KG7 with bad caps?
hi,
all system components work perfectly... the system is now running with an ASUS A7N8X Deluxe in Dual Channel Mode with no problems of data loss or anything. And at 133x2MHz FSB. All great. Reinstalling ABIT Mobo -> can't boot anything. It was a great mobo, with RAID controller onboard but I decided to take it away.
Thankyou for support and sorry for my english.
bye
damtech
-
Excuse me
Hi guys,
excuse me if I have been absent for these months but I have had troubles with the power supply of this computer, a QTEC BigFan PFC 400W... I changed it with an old Enermax I had in the garage and now it works very well even with my A64 3400+ overclocked with 250MHz FSB. I tried changing that cheap ass 350W powersupply but no changes. I changed everything, all components, so I think the problem is on the mobo. Now, with 133MHz no OS starts (DOS also hangs on booting) and with 100MHz I have "data lost" messages very often, compromising Windows registry...
Leave a comment:
-
ABIT KG7 with bad caps?
Hi,
I'm new in this forum... I'm 17 and I come from Italy.
This site really attract me because I have a problem with an ABIT KG 7 RAID mobo... The system always POSTs and NO memory error are reported. When I start Windows 2000 Advanced Server setup all works fine, only one CRC error during file copy 5 months ago. (I have reinstalled yesterday and no errors during "blue screen" setup). After installing OS, I got many error when installing SP4, both from SCSI and ATA CDROM drives (System drive is on highpoint HPT370 RAID controller,i've tried connecting drive to onboard 686b'...
No activity results to display
Show More
Leave a comment: