Lenovo IdeaPad 5 15IIL05 GS557 GS558 NM-C681 bios
Hi
i Need this bios
Lenovo IdeaPad 5 15IIL05 GS557 GS558 NM-C681 bios
thanks
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: Macbook Pro A1708 820-00840
try to connect
but it completely changed
start from 5 to 20 normal
amp increase to 0.26 to 0.6 then return back to 20 0.26 A/ 0.29 A
all voltage stell present , fan spin but no post
Leave a comment:
-
Re: Macbook Pro A1708 820-00840
i forget increasing to 0.9 A and last go down t0 0.01 A
Leave a comment:
-
Re: Macbook Pro A1708 820-00840
thanks
i use orginal macbook pro charger
and i used also by-3200 and the same result.
when use usb amp meter start med 20 v, 0.56 A
and go down to 20v, 0.26A
Leave a comment:
-
Macbook Pro A1708 820-00840
i have macbook pro A1708
at first 15 sec all the voltages presents
but after that voltage on L7670 change from 5 to 0
and voltage on L8030 change from 1.2 to 0
-
Re: Lenovo Yoga 530
i can inter the bios normally with or without ssd
with ssd i recover the system and its recovered but when the computer need to boot to windows nothing change, its the same problem.
i have 2 place for ram and use 2 ddr4 ram and change it to 1 piece 8 g
and move it to another place , and the same
i didnot run lenovo diagnostics bz i dont have bootable version
Leave a comment:
-
Re: Acer VX5-591G C5PM2 MB LA-E361P Schematic
what about board view?
Leave a comment:
-
Lenovo Yoga 530
Who have solution for this problem
It's not SSD
It's not RAM
Trying to go to windows but after 15 sec start again...
-
Re: macbook pro A1706
morning i will do it
thanks for help
any more sugestion to try
Leave a comment:
-
-
Re: macbook pro A1706
no previous repairs
there is small liquid over u7430
Leave a comment:
-
Re: macbook pro A1706
no not present
0 voltLast edited by hani002; 11-19-2020, 05:06 PM.
Leave a comment:
-
macbook pro A1706
the fans spin and all the general voltage present
the usb amp meter start from 20v , 0.23A then the amp goes to 0.01 then return back to 0.23
there is no picture and the capslock not light.
No activity results to display
Show More
Leave a comment: