Re: Replacing capacitors on Gainward GTX Titan, which ones to choose?

Thanks for all your replies and comments.
Ok, sounds like just better let this card go and move on
And practise with PSU first, if want to have some soldering experience.

Re: Replacing capacitors on Gainward GTX Titan, which ones to choose?

Thanks for the replies.
This is kind of hobby project, as I already have a new graphics card on my pc. In case I wanted to practice and try to change the capacitors still, just for fun, so which capacitors are ok? Would the nichicon RL81C271MDN1KX be ok?

How is the quality of Lelon nowadays, are they ok?
I read from the forum that at least previously Lelon made some bad quality caps?

Re: Replacing capacitors on Gainward GTX Titan, which ones to choose?

Here's a pic of the capacitors.


[url=https://imgbb.com/][/url]

Regardng the PSU of the computer, I have tested the PC using GTX 460 card, and everything was working fine with that card. Also the height of the capacitor is important as there is a heatsink which does not allow for any taller capacitorsRe: Replacing capacitors on Gainward GTX Titan, which ones to choose?

Here's a pic of the capacitors.


[url=https://imgbb.com/][/url]

Re: Replacing capacitors on Gainward GTX Titan, which ones to choose?

Well, the card does not work in games any more. It's ok to boot to windows and desktop use, but when starting any game with 3d graphics, the computer freezes with gray screen. Then need to power off the pc and restart it to get it up and running again. I was just thinking that when 3d graphics starts, then the card starts pulling much more watts than in desktop use, and capacitors are needed to supply it. So that lead me to suspect that there might be issues with capacitors.

Hi all,

I should be replacing capacitors on my graphics card. The current ones are:
A3
OCRZ
270
16V

Height and diameter are both 8mm. Which capacitors should I buy to replace them?

From Nichicon I found these, would they do?
RL81C271MDN1PX
At least size would be the same..

Thanks

Re: New Members - please post your introductions here

Hi,

I'm around 40, from Finland. Interested in electronics and how to troubleshoot the issues and problems in them. Current project is to change the capacitors to my graphics card.