Re: Panasonic TC-P55GT30 7 Blinking Lights... SC Board OK
Also, there are no shorts between pins 2 and 6
of SU41, SD42, or SD46.
Jo43jo
New Member
Last Activity: 03-18-2019, 05:07 PM
Joined: 03-15-2019
Location: MD
-
Re: Panasonic TC-P55GT30 7 Blinking Lights... SC Board OK
Original post no, but showes zero ohms. I have now
Will measure with a different Fluke with higher pitch.
If I place the black lead on ground and scan connectors
With Red lead No beeping. If I reverse the leads I get some
beeps.Leave a comment:
-
Re: Panasonic TC-P55GT30 7 Blinking Lights... SC Board OK
CORRECTION. my proof reading is poor.
With Red lead on ground and scanning with Black,
No shorts! But scanning with Black on ground and scanning
with Red all are shorted!Leave a comment:
-
Re: Panasonic TC-P55GT30 7 Blinking Lights... SC Board OK
I would like to ask a question. My 55GT30
failed with the 7 blinks of death. My checking
confirms the SC board is shorted, I think I can
handle that. Also Q661 is not shorted. The SU
and SD show No short placing the Red lead on
the proper ground and scanning the flex lead
connectors. But if I place the Red lead on ground
and scan the connectors all show .785 ohms!
Do I have a problem? Which is the proper way?
Thanks JoLeave a comment:
No activity results to display
Leave a comment: