Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
essele
New Member
Last Activity: 12-23-2019, 06:37 AM
Joined: 03-01-2019
Location: Poole
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Re: Panasonic Viera / 17IPS20 / Backlight or Driver?

    Thanks.

    So it all seems to be ok from a backlight perspective!

    But unfortunately the panel seems to have an issue with a small band of slightly dimmer horizontal lines, I'm pretty sure these were there before I fixed the backlight ... it was an eBay punt!

    Anyway, I assume this is a panel issue so not fixable?

    Picture attached.

    Even if it's a write off, it was a great learning experience doing the backlight.

    Cheers,

    Lee....
    See more | Go to post

    Leave a comment:


  • Re: Panasonic Viera / 17IPS20 / Backlight or Driver?

    Sorry to be so slow responding to this ... a combination of waiting for parts and being away.

    Anyway, like a fool I didn't listen to everyone's advice and I changed the driver ... at first I thought it had worked, but sadly no.

    So I dismantled the whole thing and discovered 2 faulty leds ... one was off all the time, the other was off when I was using my constant current source, but often came on (although sometimes with a delay) when using the TV supply.

    I've just replaced both of...
    See more | Go to post

    Leave a comment:


  • Panasonic Viera / 17IPS20 / Backlight or Driver?

    Hi,

    I've just got hold of a Panasonic Viera 49” screen that seems to have a backlight issue.

    The screen turns on fine and runs for a few minutes and then appears to turn off, however it looks like it's just the backlight that goes off, everything else seems ok (sound is still there if I have enough time to get iPlayer started.)

    I've done a bit of initial investigation and I suspect the LED driver (MP3349S) on the 17IPS20 power board, as it appears to get really quite hot … pushing 60degrees when measured from the other side of the board, so it's...
    See more | Go to post

  • Re: New Members - please post your introductions here

    Hi,

    I'm just starting to have great fun repairing stuff ... have been working on quite a few bits of test gear (mostly bench multimeters), but have just got a TV with a backlight issue to have some fun with (although I need a bigger bench!)

    Sadly all the caps look fine!

    Lee.
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X