Re: Philips Plasma 50PF9431D/37 Chassis BJ2.5UPA

Yesterday after the post I did some more test and I disconnected the Y Sustain power cable and left the SSB connected. After turning on the TV the 6 blinking lights are gone and the TV green lights stay on. So I believe it either the y sustain board or the buffer boards. I am trying to figure out how to test these boards with a multimeter (if this is possible).

Re: Philips Plasma 50PF9431D/37 Chassis BJ2.5UPA

Did you ever figure out the problem with the 6 Blinking Lights for the Philips Plasma. I have been told two different things that it could be. Which is the Power Supply (which I changed) or the SSB (small signal board). I also have changed the logic board. Most people have problems with the capacitors however, they look good to me. Even with the power supply and the logic boards changed I still get 6 blinking lights. I would change the SSB if I believe this would fix the problem.

I also do not like to give up, so would...

Re: New Members - please post your introductions here

Hi Just looking for information to fix my TV