xmetal
Tinkerer
Last Activity: 08-17-2024, 02:51 PM
Joined: 11-11-2010
Location: England
-
I use a TIS 560. I find it works quite well. I wanted a Fluke but it was too expensive for what I needed. -
Re: Problem with TX650 Corsair Power Supply
Those green electrolytic capacitors in the last photo look like they are bulging and will likely need replacing. Do you have an ESR tester for checking the caps?Last edited by xmetal; 11-06-2019, 05:19 PM.Leave a comment:
-
Re: need advise for buying microscope
I got the Amscope SM-4NTP 7X-45X simul-focal stereo zoom dual boom microscope with a 0.7 Barlow lens and ring led light. It performs very well but I haven't got a camera for it yet though.Leave a comment:
-
Re: PS4 Controller acting weird
Looking at your board it looks like you might have some liquid damage at this point.
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=202179&stc=1&d=1572802025[/url]Re: PS4 Controller acting weird<br /...72802025[/url]...Leave a comment:
-
Re: looking for a schematic /advice on CT-852K hot air station
I used to use a Zd-939a hot air station and it was hopeless at getting to a temperature or maintaining it so I recently upgraded to the Quick 861DW. It has made a world of difference to hot air rework.
I do have a Honton r392 BGA rework station for the bigger chips but I tend to use it mainly for pre-heating boards.Leave a comment:
-
Re: New Members - please post your introductions here
Hello everyone, my name is Andrew and I'm from the UK.
I've worked in the communication and computer industry for many years and have had to replace many a faulty capacitor both for work and my own benefit.Leave a comment:
No activity results to display
Leave a comment: