Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL
yea that works sort of,
i modded my bios to a somewhat decent set of defaults.
the issue is that if i constantly test/reset/test it eventually says chassis intruded.
however given my situation is a bit different (ground has 5v.) and i could not fix it yet, i am stuck with bios modding.
nearly impossible to overclock and save the settings, but im getting by..
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL
*cant edit my message
but i also have continuity to more than one transistor, so i decided not to go ahead with the mod. pin 3 (intrusion signal) has continuity to multiple spots on the motherboard.
a head scratcher for sure
Leave a comment:
-
Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL
great info, thanks for keeping this alive.
i have an odd one here;
p5q
5v showing on the pin4 (ground)
So i read another tutorial saying if you have voltage on the ground pin, the pins wont jump and put intrusion detection at its normal state. (jumped signal and ground)
I have 5v on the ground pin...so i tried grounding the signal and ground pin on that header to a psu ground.
This did not work unfortunately....
Leave a comment:
No activity results to display
Show More
Leave a comment: