Re: Samsung TV Flickering on start up

Thank you for all the information. I re checked Pin 6 (Blu_on) and got 5.1V. My mistake.

On CN 1801, Pin 1 (High Fet) should it be higher than 185V?

Re: Samsung TV Flickering on start up

Would you happen to know what the voltage of Pin 6 should be?

Hi all. I am 'the new guy' to this site. I stumble across this site awhile back while looking for some information on an Samsung TV. Really enjoyed reading everyone's input; which helped me repair that TV.

Now, I have a Samsung TV model- LN32D403E4DXZA version SP01 that had a bad power board among other issues. Power board's circuit from the main cap to the back light inverter blew and the board was damaged beyond repair. I got a replacement board (BN44-00438a) that failed while still testing the TV. I used the attached schematics (2 different schematic for this board. The...

Re: New Members - please post your introductions here

Hello everyone. My interest in electronics began a little over a year ago while setting up an HO model train set. I needed some simple circuits for my layout, so I picked up the book 'Electronics for Dummies' and began learning. I was hooked.

I stumbled across this site while searching for repair information for my Samsung TV. I found its' members to be very knowledgeable and helpful, so I wanted to join and say "THANK YOU" to all of you for taking the time to help out others!