hello. i need the bios password removed from this dump.
this is a HP Elitebook 830 G8
serial is: 5CG142C2FK
board is: CORVETTE-6050A3217501-MB-A01(A1)
this was dumped from next to m.2 connector,
bios firmware will be attached below. thank you to whoever helps me out....
Hoanr
Member
Last Activity: 04-26-2025, 10:30 PM
Joined: 10-01-2018
Location: Oklahoma city, Oklahoma
-
Surface Laptop model 1769
SN: 027977375157
Motherboard: M1029273-001
UEFI LOCKED. says system password needed. need password reset, thank you very much. a guide on how to do those would be very much appreciated since i will have a lot of them come in....Leave a comment:
-
Surface Laptop model 1769
SN: 023934782157
Motherboard: M1029273-001
UEFI LOCKED. says system password needed. need password reset, thank you very much. a guide on how to do those would be very much appreciated since i will have a lot of them come in....Leave a comment:
-
Hello, need bios password removal for surface laptop 4 1951
sn 005080121757
i've uploaded the bios file. [ATTACH]n3256708[/ATTACH]...Leave a comment:
-
never mind you have to scroll down! duh!...Leave a comment:
-
thanks for your help. it works, boots up and all. what im unable to understand is "press f10 reset security settings to default". i cant find it...Leave a comment:
-
i have uploaded both chips. top is facing the bottom cover. bottom is facing the keyboard....Leave a comment:
-
hello. i have locked 830 g8 in need of unlocking. there is a 256mb w25q256jven ic on the top and a 256mb w25q256jven ic plus 8mb w25q80dvig ic on the bottom. which one is needed to be flashed to get bios unlocked?
i did modify to remove password via youtube tutorial, however, caps lock flashed 5 times and wont boot. had to use windows + b recovery and now password is still there and it throws a endpoint security error.Leave a comment:
-
Re: Samsung PN58B650S1F Power Board Clicks, No Picture
.Sorry for butting in this thread, I have a e series plasma TV made in 2012 by Samsung, it seems to have the same problem as yours, the stand by voltage and lights are all good, when I turn it on the vs and va voltages are perfect, but the logic board and red light all blink and the TV displays a flash then a snow effect then turns fully off, then it turns itself on again and does the same thing over and over until I unplug the mainboard from the power supply, I don't know how to force turn on the power supply without the m...Leave a comment:
-
Re: Another Samsung Plasma(PN59D530A), audio but NO picture post
Unscrew the y bufferLeave a comment:
-
Re: Properly trobleshoot a plasma TV (PN60E530A3)
I have the same problem, the TV will turn on and prime, but then display dots for like 3 seconds then turns off and turns on again and does the same thing, all by itself....Leave a comment:
No activity results to display
Leave a comment: