Re: Sony XBR65x900c No Power
Well I just have a basic multimeter as seen in the pics. The ground that I was using was just a chassis ground that you would mount to the wall hangar. Also the board that was in it originally had the same voltage as the replacement one from eBay so I am assuming the power board is not the problem.
justintime_3
New Member
Last Activity: 09-08-2018, 12:44 PM
Joined: 09-05-2018
Location: Towanda, IL
-
Re: Sony XBR65x900c No Power
Pardon my ignorance but what is a DMM?...Leave a comment:
-
Re: Sony XBR65x900c No Power
So my house had been struck by lightning before but this tv has never worked since it was given to me so it has not been struck by lightning yet
The board that I replaced had the power plugged directly into it so I am assuming its the power board but I really have no clue. I ordered what was called the static converter board off of ebay so we will see if that fixes it....
Leave a comment:
-
Re: Sony XBR65x900c No Power
I will have to check tonight. I didn't even check voltage as with my previous TV's i just replaced the board and it fixed the problem. I will check tonight and post results. And I replaced the large board on the left side, the board where the actual power cord plugs into so I would assume that would be the power board? I ordered the smaller board in the middle from ebay once again just to see if that fixes it. From the description listed they called it the static converter board?...Leave a comment:
-
Re: Sony XBR65x900c No Power
And a couple more pics...Leave a comment:
-
Re: Sony XBR65x900c No Power
Okay thanks for the help. I have uploaded some pics and what the voltage was on them....Leave a comment:
-
Sony XBR65x900c No Power
I was given a Sony XBR65x900c tv for free with no known condition. My house was struck by lightning last year so I have some experience replacing boards on TV's. So I purchased a board from ebay that was supposedly in new condition just had a broken screen. Installed the board and still nothing. I tested volts and the stand by voltage seems low at somewhere around 2.5 volts. Not sure if this is normal but open to suggestions on what to do next. Thanks -
Re: New Members - please post your introductions here
New guy here. Had lightning strike my Dish last year and replaced a couple boards in two of my TVS to get them back up and running. Now I have been given a Sony XBR65X900c flat screen tv and am trying to do some diagnosing. Looking for some help from the knowledgeable people on this forum to guide me in the right direction.Leave a comment:
No activity results to display
Leave a comment: