PLZ HELP TO REMOVE PASSWORD
service tag 2H0CVC3...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
FP250 LA-H323P
Rev :1.0
2019-01-04
i5 10th(processor spec code SRGKY)
I have Got only motherboard to repair
No Exact model no. and serial available
And original bios is also deleted by someone who tried to repair before
Plz help me with its compatible bios...
Tried some Bios from forum but no luck its ampere is taking upto 0.340 but nothong on screen or keyboard
2 Photos
Leave a comment:
-
-
-
Laptop would not turn on after dishcharging
lenovo B40-30 MBD LA-B102P
I am facing a strange problem, this system is not turning on when it get complete dishcharge, neither with battery nor with plugin adopter, AND It also not turns on when I make it shut down and try to on after few hours. And when I unplug battery and again plugged in it will work normally battery also getting charge, and battery percentage is same as it was present during shutdown time
In case of without battery it will work normally and turns on every time.
what will be possible cause?
I checked physically there will be no any corrosion in...Last edited by pratyush; 08-29-2020, 04:50 AM.
-
Dell iris bsw mb 14279-1 Schematic
Need dell iris bsw mb 14279-1 need schematic..
Leave a comment:
-
Alienware M14x R2 bios password
I have a alienware M14x R2 laptop with a bioS Locked
and when I enter wrong passcode then it says system disable
System Disable
93AE742A3E10eAD03
Service tag
B1F0BW1
need yr help to to remove this password.
cmos reset by removing cmos battery already tried...and the software that i have to generate password didn't work for this service tag.Last edited by pratyush; 06-08-2019, 03:07 AM.
-
Re: hp dv6 hpmh-41-ab6200-e00g Dis to Uma
Thnx alot Sir
It works...
Many thnx for always clearing my doubt
Leave a comment:
-
hp dv6 hpmh-41-ab6200-e00g Dis to Uma
I hv got this MBD with blank screen...
External diaplay output is not present also...
I try to make it UMA enable but unable to succeed
The changes that I made are mentioning below...
PL801 PL803 removed
Used a jumper for M50 Drain To Gate
changes Location of RJ806
Now MBD gets off immidiately after switch On....
-
Re: N5010 colour issue after conversion
I checked for RN connector rn7701 which seems to be for colour that is okk...
Plzz mention other rn connector that should be checked...if possible
Leave a comment:
-
Re: N5010 colour issue after conversion
Screen nd display cable already checked...
Leave a comment:
-
N5010 colour issue after conversion
Facing orange colour issue on screen after conversion discrete to uma..what will be possible solution.....
-
Thinkpad Carbon X1, LMQ-1 MB 12298-2 Black screen
I have 2 thinkpad carbon x1..
Problem I am facing with these 2 are listing below..
1st
Mobo is getting on And there will be light on keyboard..
In diagnosis got 2 burned fuse in lvds section F3(for3.3v) and F7(for19v) changed it bt condition remains same
And F3 burned out again...then i use jumper wire
bt condition remains same.
2nd
Mobo is getting on nothing on screen, Not presense of light on keyboard.
Lvds section seems to be ok
Voltages on coils in both case L3 L4 L5 L7 and L28 are okk
...Last edited by pratyush; 12-04-2018, 05:25 AM.
No activity results to display
Show More
Leave a comment: