Re: LG 50LA6200-UA - LED Problem

Hello guys.
it took a while for the LED backlight to get delivered. I had ordered the entire kit since i thought why risk another LED failing and needing to open the TV all over again. I had also ordered for two suction cups to lift the panel up.

Did the LED swap today. As expected, the dark circles meant 3 LEDs were not lighting up. Replaced the entire bank of LEDs and put everything back together. All LEDs are firing now and TV works perfectly upon assembly.

Thanks for sharing your opinion and pointing me the right...

Re: LG 50LA6200-UA - LED Problem

Great advice... since most videos disassemble from the front, i would rather do that for the sake of knowing what to do... will also try order suction cups locally...
Will soon share what happens next

Re: LG 50LA6200-UA - LED Problem

Hi Yohnsee and neilc6....thanks for the advice! I suspected it was the LEDs.

Should i definitely be using suction cups to lift the panel up or just careful hands should do? This will be my first time handling an LCD panel.

Hi everyone,
I have a 2013 LG LED TV - 50LA6200. LG logo comes for 1 sec then no picture, continues to have sound, Flashlight test shows a dim picture.

I need your help in figuring out if its the LEDs or the power supply (pic attached EAX64905501 (2.0) REV1.0) that needs changing.

Here is what my goofing around tells me.
With LED wire connected or disconnected to the power supply
Led+ (1 - Left on the connector)) Voltage - Goes to 170+ when backlight switches on then stabilises to 78
Led+ (2 - Right on the connector)) Voltage - Goes to...

Re: New Members - please post your introductions here

Hi everyone,
This is Rajat from Singapore. Have always been one to open things up, some lived while other I couldn't close. Stumbled across Badcaps while googling about a problem that I currently have on my LG TV and I must say I was mighty impressed by the group member's knowledge and willingness to pitch in!