Re: 2011 Panasonic TC-P50GT30 7 Blinks Help

Also removed all three connections between SC and the SU and SD boards (SC41, SC42, and SC46). Removed the 4 VFG screws between the boards and jumped SC50. Fired it up and get 6 blinks.

Re: 2011 Panasonic TC-P50GT30 7 Blinks Help

Thanks tvtimmy.

I checked for shorts on the power connections on ss and sc board and there were none. I check all the wires from the P board to the sc and ss board and all wires were good.

I did make a little progress. When I turn the tv on I can now hear a buzz and the green LED on the SC board will light up only for a second then a click and then the 7 blinks comes back. Any idea on what is causing that?

Thanks!

Hello all.

My Panasonic Plasma is on its 2nd 7 blinks error. I fixed it the first time using a repair kit for ShopJimmy. Well its back 1.5 years later. Was SC board so bought a used SC board off ebay. Replaced and got same 7 blinks. The green LED on the SC board never lit up. Unhooked SC from buffer boards SD and SU and removed grounding screws connecting SC to bufferboards and shorted SC50 and still 7 blinks. So now I am assuming the SC board I was sent was bad. To see if the TV would just stay on I unhooked the power and ribbon cable from the SC board and turned it on. I get 8...

Hello everyone. Joined to get some insight on my Panasonic Plasma. Already fixed it once with 7 blinks. Repaired with repair kit from ShopJimmy. Well 7 blinks is back and would like some expeet help. Look forward to talking with you all. Tha ks!