Re: Laptop ccfl lamb vs monitor ccfl lamb
Thanks for quick reply,
Could I use the laptop 15.6 lamb on the 22inch monitor without a risk.
If YES , could I use the monitor if that situation works, for operation mode not just for testing?
Many thanks in advance....
ahmedsamir
New Member
Last Activity: 08-17-2018, 06:52 PM
Joined: 07-28-2018
Location: Cairo
-
Re: Laptop ccfl lamb vs monitor ccfl lamb
Thanks for quick reply,
So what is the difference between them , laptop lamb and monitor lamb?
Why the first has just one pair of wires while the latter has two?
What is the role of each pair of the monitor’s ccfl, if the laptop ccfl works fine with just one pair of wires red-white ?Last edited by ahmedsamir; 08-17-2018, 10:32 AM.Leave a comment:
-
Laptop ccfl lamb vs monitor ccfl lamb
As I am a beginner, I have a question.
Comparing laptop ccfl lamb with one pair of wires (red-white) , with pc monitor's ccfl which have two pairs (red-white) , (black-white) wires.
Could I use the laptop ccfl lamb with one pair of wires instead of the monitor lamb which have two pairs.
I'm using the laptop lamb only to prevent the protection circuit form Kick in.
Is the LCD monitor two ccfl pairs are for two lambs ? Or it has two pins for each side, not like the laptop ccfl that has one pin for each side resulting in just two wires not four? -
Re: Fujitsu l22w-1 , 2 sec black
Thanks for your help,Leave a comment:
-
Re: Fujitsu l22w-1 , 2 sec black
How to bypass the protection circuit, and why it is a very bad idea?
Why the protection circuit turning off the lamb when connected alone?
Thanks for your cooperation ,...Leave a comment:
-
Re: Fujitsu l22w-1 , 2 sec black
then the capacitors doesn't need to be replaced?
as the problem is with the bad lamb , which need to be replaced?
Do you recommend replacing the two lambs , or only the bad one?Leave a comment:
-
Fujitsu l22w-1 , 2 sec black
A Fujistu l22w-1 flickering and dimming for 2 sec then black screen , it has Samsung panel LTM220M1-L01 , with two upper and bottom ccfl tubes .
the images for the power board are attached, focused on the capacitors.
I think the capacitors are OK, as their shape is good. (I'll go replacing them after consulting you as you are the experts, after being certain they are the problem).
by disconnecting the upper ccfl tube and just connecting only the lower one, the screen turns on its light very good without the flickering and dimming issue, but just for... -
Re: New Members - please post your introductions here
Good forum, thanks for admins.Leave a comment:
No activity results to display
Leave a comment: