Re: Panasonic th-58pz700u 1 blink, help plz

The troubleshooting diagram actually doesnt make sense to me. I attached the diagram.

I unplugged the d3 connector from the D board. I plug in the tv and it automatically turns on, but there is no power light. The part I dont get is the second part of the question. "No raster with SC and SS LEDS on"? I search high and low on the two boards and I dont see any led lights, which I assume would be pretty obvious. So YES the tv turns on automatically, but NO leds on the SC and SS board are on. So do I goto to the Yes...

I have a 2008 th-58pz700u plasma that I love. It recently decided to turn on and then turns off after about 5 seconds. If I unplug the power cord from the wall and plug back in the TV will turn on automatically and then turn off after 5 seconds. The front LED power light blinks 1 then 3 seconds later blinks again 1 time. I replaced the DG board with a working DG board and I get the same symptoms. If I press the front power button for 10 seconds and power it on, it does the same thing, instead flashes 12 times. So I replaced the H board. This is all according to the service manual.
...

Re: New Members - please post your introductions here

New member here looking to learn some new stuff.