Re: LG OLED65B7P-U thin horizontal black line
Thank you Diah
i will have a look. I will update here, if i find something interesting in the service menu.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: LG OLED65B7P-U thin horizontal black line
Hi Manitoban
The defect in the panel triggers a safty shutdown, it does not stay on longer then 5 min.
I charge a $50 diagnostic fee.
2 out of a 100 customers want there unfix-able (panel issue/parts do not exist)or (too costly to repair) TV back.
Leave a comment:
-
Re: LG OLED65B7P-U thin horizontal black line
In this low light picture, you can see the line. It is there in normal mode too. So you say, it is a (not completed signal or not strong enough signal), that gives this TV an unfinished line.
That sounds better then a COF or banding issue.
Could it also be, that the main board sends an incomplete signal? instead of the t con?
Danke...
Leave a comment:
-
Re: LG OLED65B7P-U thin horizontal black line
Thank you for the feedback
bad panel driver/tabs or bad adhesion of COF; they are hidden behind an aluminum cover and i would have to dremel the back open to access them.
I will try adding some pressure on the visible conections
if that wont work i will see if the customer lets me disect his expensive piece of garbo
so t con and mainboard are out of question then
Leave a comment:
-
LG OLED65B7P-U thin horizontal black line
I unlocked the tv with a service remote. I can see a thin black line(see attached picture)
i can keep the tv on from 20 sec to 4 min, depending on how much image is being displayed.
high rez images make the tv shut of instantly.
i can play a dvd for a min
that line is on top every image, osd, dvd, menus, factory menus
the line starts on the left side, 8 inches in and ends about 1 inch from the right side
it is not locking up after 5 shut offs
all voltages are good till it turns off
...
-
Replace Backlight 6V LED with a resistor, diode or jumperwire
Can i replace my TV Backlight led 6v with a resistor, diode or jumperwire or 2 3V led in parallel?
if yes what kind of values do i need to know and calculate?
Yes i know, I might get a dark spot on my tv.
6v 1000pc leds got lost during shippmentanother week for the next shipment. Tv is mine, i need it of the bench.
Cheers, Dan
-
Re: Samsung SyncMaster T2600HD is dimming
Read "4Troubleshooting.pdf" in "https://www.badcaps.net/forum/showpost.php?p=677215&postcount=12" to id which board causes the issue.
Mainboard was my issue. Ordered the last one that is out there in world wide web. Also ordered the "SEMS10 IC"(Big main Processor 280+ legs). Will attempt to fix the old board. PM me if need a mainboard.
Leave a comment:
-
Re: Samsung t260hd no power led
Read "4Troubleshooting.pdf" in "https://www.badcaps.net/forum/showpost.php?p=677215&postcount=12" to id which board causes the issue.
Mainboard was my issue. Ordered the last one that is out there in world wide web. Also ordered the "SEMS10 IC"(Big main Processor 280+ legs). Will attempt to fix the old board. PM me if need a mainboard.
Leave a comment:
No activity results to display
Show More
Leave a comment: