Re: Nintendo Switch component identification
I also plugged in the Battery of the other Switch and on Pin 1 I could measure for a short time 5V. I guess it has something to do with Slow/Fast charging. After a few seconds the Voltage was going down to 0V there.
That would also explain, why the Switch works fine on a 5V Supply, but not on the official Nintendo 15 Volt Supply.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Nintendo Switch component identification
Thanks again for the replies,
i have disassembled a second defective Nintendo Switch which often freezes (i tried to reflow it in the past, ....it still freezes) but it should be okay for measurements. I have measured the voltages when charging a battery, and I measured resistance to ground in diode mode (positive to ground and neither battery or USB-C connected)
I mean i could use the part of the other Board, but as I dont know what caused the hole in the part, I would like to have a few replacement chips...
Leave a comment:
-
Nintendo Switch component identification
Hi there,
I have been using this forum since a long time, and i could always find help by just searching the existing threads for informations. It seems like this is a great and helpful community.
However, i coundn't find info anywhere on this particular problem i have right now.
My Nintendo Switch works fine, until i plug in the official charger, then the switch itself charges, but the controllers and the Fan stops working/charging. It still works with a Regular 5 Volt Charger. So i guess it has something to do with the Step Down line from 15 Volts to the Voltage...
-
Re: New Members - please post your introductions here
Hi I'm Gerald from Germany. I'm working as a system/network administrator, and one of my hobbies is board level repair. This forum has helped me a lot in the past, just by searching you find so much information which you cannot find elsewhere on the Internet. Really a great community.
Leave a comment:
No activity results to display
Show More
Leave a comment: