Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
Maybe you want this setup utility for Dimage Scan Elite 5400II
It doesn't work with Dimage 5400 (first version).
It works perfectly with Windows XP mode on Windows 7 64...
Glad if it can help you
Bertrand...
BGUERBET
New Member
Last Activity: 09-09-2019, 10:19 AM
Joined: 04-05-2018
Location: PARIS
-
Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
After replacing the capacitor with a conventional chemical, the scanner works perfectly again. Thank you very much for your help, especially for reading and interpreting the characteristics of the faulty capacitor...
The defect one have less than half its original value......Last edited by BGUERBET; 09-09-2018, 03:31 PM.Leave a comment:
-
Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
The brown run is neoprene glue that is next to the winding of a self ... But anyway, the capacitor is dead ... Thank you for your comments ... Bertrand...Leave a comment:
-
Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
A big thank you to you ... Indeed, the device dates from 2004 and capacitors have on the last line from 308 to 311 which corresponds to a date of manufacture in 2003. The diagram of the integrated circuit also confirms the value . I am going to mount a chemical capacitor of 1uf 50v and I come back to you to tell you if everything is back in order ... Good Sunday ... God bless you and America... Bertrand...Leave a comment:
-
Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
My computer is under win7 64 with XP mode for the scanner and was running the original Minolta application.
The scanner worked very well before the failure, both USB and FireWire ... Of course, I tested on another machine directly windows XP ... Without success ...
Anyway, there is a faulty component to replace, so this is the first thing to do before making new investigations, no?
I am just looking for confirmation of the value of the capacitor described above ...
I remember what...Leave a comment:
-
Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
This scanner only have USB & Firewire6 connexion......Leave a comment:
-
Re: Cap. plague in Minolta DiMAGE Scan Elite 5400?
Did you find the cause of the breakdown ?
I had a similar failure and I found an inflated capacitor near the CI 8 legs (AIC1563CS regulator which is also very hot, probably because of the capacitor that has sunk) at the top of the card ... But I do not do not know how to interpret the value of the capacitor ... It is 4mm in diameter and 7mm high ...
It is written:
1
50G
310
It is not branded
Do you know what is its value in μF nF pF?
thank you for your reply
...Last edited by BGUERBET; 09-06-2018, 02:33 PM.Leave a comment:
-
Re: Acer 8943G Accidental Short, No Power
I had the same problem without short-circuit.
I took the condenser from an other 8943g motherboard
One of them was cout-circuited with a 7 ohms value...
thank a lot for all !!!
Bertrand from Paris !...Leave a comment:
No activity results to display
Leave a comment: