Re: Problem with Viewsonic VP211b



Guys. Thanks for the updates. I ordered the following fuses from mouser.com, (63V 2A) littlefuse fuses which look like the original fuses on the board. I have removed the F2 fuse and replaced it with a new fuse. I reading the Multimeter and both the F1 and F2 fuse read around .2ohm's. So I am going to assume that he F2 fuse is now good. I am wondering if I should attempt to replace the F1 fuse as well since my LCD panel is still stuck on a black screen as soon as power on. Any other ideas?

Thanks,...

Re: Problem with Viewsonic VP211b



No luck finding those fuses at any of the local electronic/hardware stores. Will the fuses in either of these links work? I am not sure the voltage but the amperage is correct?

[url]http://cgi.ebay.com/Pico-Fuses-2-Amp-Package-5pcs-/160407565026?pt=LH_DefaultDomain_0&hash=item25590932e2[/url]

[url]http://cgi.ebay.com/10X-Littelfuse-Pico-Fast-Acting-Fuse-2A-263-Series-/180539594176?pt=LH_DefaultDomain_0&hash=item2a08ff95c0[/url]

Thanks,Re: Problem with Viewsonic VP211b
...

Re: Problem with Viewsonic VP211b



Hi,

I have a VP211b monitor that is acting as described in this post. Can you post as soon as possible what the Pico fuse amperage should be? I would like to pick one up today and replace.

Thanks,...