Re: Sharp LC-60EQ10U no display code 3-1
I ended up getting a used power board from ebay and it worked like a charm. Thank you for all your help.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Sharp LC-60EQ10U no display code 3-1
That's a good idea. Thanks a lot.
Leave a comment:
-
Re: Sharp LC-60EQ10U no display code 3-1
Yeah that makes sense. Unfortunately, I don't. I'm an IT guy so I have 0 experience when it comes to this stuff. Everything I have done so far is from online reading and research.
Let me see if I can find any tools and tutorial for soldering.
Leave a comment:
-
Re: Sharp LC-60EQ10U no display code 3-1
Thank you so much for the quick response.
Is this regulator located on the power board ? If yes, installing a new power board will fix this issue ?
Leave a comment:
-
Re: Sharp LC-60EQ10U no display code 3-1
Sorry, correction Pin 1 gave me a little more than 7V and Pin 2 as 0V
Leave a comment:
-
Re: Sharp LC-60EQ10U no display code 3-1
I have the same TV and the same issue too. I tested all the pins and was able to pin point 2 pins whose volts did not match with what was listed.
Pin 1 & 2 shows 12V on the board but when I tested it Pin 1 only gave me a little more 7V and Pin 2 was 0V.
So, does that mean the issue is with both Power and Main boards ?
Leave a comment:
No activity results to display
Show More
Leave a comment: