Re: Samsung un65fh6001 issues
I tried the ribbon cable 30 different times. I took the ribbon cable from the other side and tried that to make sure it wasn't the cable. Still the same result. I looked at all the components, couldn't find any broken ones or damaged ones. Any other ideas? Thanks!
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung un65fh6001 issues
Here are the pictures from having one side of the tcom ribbon removed. It looks like that's the issue. But how do I fix it? Thanks....
Leave a comment:
-
Re: Samsung un65fh6001 issues
Yes I had everything off when I assembled it. I also pulled the bezel off when I was checking the ribbon. I also reconnected the ribbon multiple times and tried it to make sure it was connected correctly. Thanks for the help guys though I really do appreciate it!
Leave a comment:
-
Re: Samsung un65fh6001 issues
I ordered used LED strips from eBay and I'm pretty sure one of the strips wasn't good when I tested it but wanted to make sure everything worked ok. I think when I was lifting the TV up I may have damaged the ribbons because I did it by my self and it puts a decent amount of pressure on the bottom of the TV when you lift it. I'll try the removing one strip than the other here in a few mins.
Leave a comment:
-
Re: Samsung un65fh6001 issues
Yes I reconnected the ribbons on both ends to make sure they were connected properly.
Leave a comment:
-
Re: Samsung un65fh6001 issues
Sorry I thought I attached it. Here it is...
Leave a comment:
-
Samsung un65fh6001 issues
Hi I received the TV and trouble shot it down to the back lights. I replaced the led back lights and everything was good. I turned it on it worked great. After I put the bezel and the case back on and turned it on again all I get is vertical colored lines. I checked all the ribbon cables and everything is fine. There is a picture attached of what I get now. Any ideas on what causing this? Thanks so much!
-
Re: Samsung UN60J6200AFXZA....no backlights but a picture
Ok is there anyway to make sure it's the LEDs before I buy them? I have it all torn appart down to the LED strips. Because I also thought it was them. But there is a thread going around that has high voltage out but is still the power supply. Thanks!
Leave a comment:
-
Re: Samsung UN60J6200AFXZA....no backlights but a picture
I have a Samsung 65" led that has picture and no led backlights (Verified with flash light). The power supply to the LED strips read 320v on all 4 pins when grounded to the chassis. Do I have bad LEDS or power supply and is there a way to make sure? Thanks. Sorry for hijacking thread as it won't let me post my own.
Leave a comment:
No activity results to display
Show More
Leave a comment: