Re: Need help with Samsung LN40E550f7f
Thanks! I will continue to read up on this stuff. Will post after repair.
Kindred1
Senior Member
Last Activity: 02-07-2019, 09:53 AM
Joined: 02-17-2018
Location: Payson, AZ
-
Re: Need help with Samsung LN40E550f7f
No, that was a typo.Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
So is that voltage correct?Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
I knew I'd get that wrong. - 16.9 vdcLeave a comment:
-
Re: Need help with Samsung LN40E550f7f
All the specs seem the same except for the packaging type. I don't know anything about said components except what I'm learning.
Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
the 4th one is.Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
I think it's just their certificate. Heading there now....Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
My antivirus blocks that page....Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
I get 34.7vac...Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
Ok, I found it. - It appears to have a little corrosion/heat damage on the top. ( no scorching on or around.) All I can make out is as follows.
B7E
AN
7930B...Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
Ok guys. I got my meter working properly. SO, in diode mode DP810 and DP802 both read .6v in diode mode - OL in reverse as it should I believe. However in Ohm mode I get OL both directions no matter what setting it's at. I have tested other circuits to verify ohm mode is working.Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
Yes. Hence my comment to you regarding me misunderstanding and screwing up.
Apparently headaches/neckaches effect brain function. Anyway, I will do that first thing tomorrow and post my results. Thanks!...
Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
O.K. What I have is : 164.5 vdc with power on. 168.3 vdc on standby.
361 vac with power on, 370 vac on standby....Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
Ok,changed out my leads on my meter. Measured again. 165.0vdc off and 169.2
on. both caps. cp802 and cp803...Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
Well, from what I can see, there are no options in the diagnosis screen and I don't have the remote....Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
Lol, I just watched the same video before checking this. Diode mode isn't working on my meter, but I followed a tutorial and tested the ac and dc and it seems fine. 123 a/c 169 dcLeave a comment:
-
Re: Need help with Samsung LN40E550f7f
Thanks for all your input.Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
*correction* 371 in standbyLeave a comment:
-
Re: Need help with Samsung LN40E550f7f
317 in standby, 364 turned on.Leave a comment:
-
Re: Need help with Samsung LN40E550f7f
That's the large 450v caps?Leave a comment:
No activity results to display
Leave a comment: