Re: Vizio e322vl wont turn on
Wouldn't I need a heat gun to remove something like that?
lucas0113
Member
Last Activity: 05-24-2018, 11:57 AM
Joined: 02-03-2018
Location: muskegon mi
-
Re: Vizio e322vl wont turn on
Well here, this image should do....Leave a comment:
-
Re: Vizio e322vl wont turn on
And 1,2,3 is supposed to be 5v.Leave a comment:
-
Re: Vizio e322vl wont turn on
8,9, and 10 are supposed to be 12vLeave a comment:
-
Re: Vizio e322vl wont turn on
Pin name? I put what they were labeled from the board.
It even says cn201-11 is pson, and so onLeave a comment:
-
Re: Vizio e322vl wont turn on
Forgot to mention, there is no change after pressing the power button.Leave a comment:
-
Re: Vizio e322vl wont turn on
Finally got my hands on a multimeter. Here are the voltages:
I checked all the voltages (especially the 0's) a few times to ensure accuracy.
Shouldn't there be 12v somewhere??
cn201-1: 5.4v
cn201-2: 5.4v
cn201-3: 5.4V
cn201-4: 0V
cn201-5: 0v
cn201-6: 0v
cn201-7: 0v
cn201-8: 0v
cn201-9: 0v
cn201-10: 0v
cn201-11: 0v
cn201-12: 0v
cn201-13: 0v
cn201-14: 0vLeave a comment:
-
Re: Vizio e322vl wont turn on
I'm not even sure which pins are which, because they're not really labeled.Leave a comment:
-
Re: Vizio e322vl wont turn on
Again, sorry for late reply. Here are the images:
(sorry for the quality)...Leave a comment:
-
Re: Vizio e322vl wont turn on
Really? I didn't know you could get them so cheap. And sorry for the [very] late reply, pics will be up soon.Leave a comment:
-
Vizio e322vl wont turn on
Hello all, I have recently purchased a non-working Vizio E322VL in hopes of getting it to work, and just something to waste time on. But the problems it's been having are really puzzling me. It has a solid orange Vizio logo (doesn't even flash like on most vizio tv's.) And when you press the power button, it doesn't respond in any way. [Even stays orange.] I've taken off the back and looked for any puffed capacitors, but none are visible. I've even shorted the power button pins, thinking maybe that was the problem, to no success.
I'm quite a novice, but I can solder anything as... -
Re: New Members - please post your introductions here
Hi!Leave a comment:
No activity results to display
Leave a comment: