Re: Panasonic TC-P54G25 Repair Guidance.
Thanks for the guidance. Same setting on meter yields same value for sc2
Of 1384 ohms
With q661. See Pic
[ATTACH]170754[/ATTACH]
A-b= 002 ohms guessing that's showing the issue?
A-c 1709
A-d 1360
B-c 1705
B-d 1360
C-d 317Re: Panasonic TC-P54G25 Repair Guidance.
Thanks for the guidance. Same setting on meter yields same value for sc2
Of 1384 ohms
With q661. See Pic
[ATTACH]170754[/ATTACH]
A-b= 002 ohms guessing that's showing the issue?...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TC-P54G25 Repair Guidance.
Ok thanks for the help, much appreciated. I thought the resistance info might just need to be adjusted different scale. i think I'll go ahead and order a repair, if any recommendations on where please lmk.
Leave a comment:
-
Re: Panasonic TC-P54G25 Repair Guidance.
Thanks for the help! Well I’m playing with the multimeter anyway, yet not too confident in my testing skills nor the harbor freight cheapo. 1)With dial set to “2000” (see Pic) pin near sc2 lettering 1384. Other pin 001
2. Q661 both 1376
[ATTACH]170297[/ATTACH]...
Leave a comment:
-
Re: Panasonic TC-P54G25 Repair Guidance..
Mods - Not sure why, yet UNABLE TO EDIt/ DELETE ORIGINAL POST above.... please remove as it's in the wrong forum. Sorry Thanks!
Leave a comment:
-
Panasonic TC-P54G25 Repair Guidance.
Ok before sending in SC board for repair I was hoping for some help/confirmation I am on the right track.(likely send to Ptsparts, any other recommendations?)
TV "popped" and then didn't turn on; 10 blink code, but actually 4 after replugging in and then 10 after power hit (tv clicks on at plugin then again a second or two later )
Saw service manual & not sure I did this right but tested for resistance: p11 seems fine p35 didn't know how to test this; Unplugged SC board from power supply (sc2/p2) plugged TV in got a 7 blink code
**Note manual says unplug sc20...
-
Panasonic TC-P54G25 Repair Guidance..
Ok before sending in SC board for repair I was hoping for some help/confirmation I am on the right track.(likely send to Ptsparts, any other recommendations?)
TV "popped" and then didn’t turn on; 10 blink code, but actually 4 after replugging in and then 10 after power hit (tv clicks on at plugin then again a second or two later )
Saw service manual & not sure I did this right but tested for resistance: p11 seems fine p35 didn’t know how to test this; Unplugged SC board from power supply (sc2/p2) plugged TV in got a 7 blink code
• Note manual...Last edited by Rocket21; 01-25-2018, 09:23 AM.
No activity results to display
Show More
Leave a comment: