Re: New Members - please post your introductions here
Hi Iam new to this fourum trying to learn electronics thanks
aprasad
Member
Last Activity: 01-24-2018, 06:49 AM
Joined: 01-18-2018
Location: RALEIGH
-
Re: SONY KDL60-NX801 Panel
[ATTACH]170067[/ATTACH]
this is the burnt part which is on lower part where the ribbon connects to the lcd .Is that a way to replace this soldered ribbons ?i dont know it uses some type of glue , this is the main ribbon that supplies signal to green board on lcd
thanks guysRe: SONY KDL60-NX801 Panel
[ATTACH]170067[/ATTACH]
this is the burnt part which is on lower part where the ribbon connects to the lcd .Is that a way to replace this soldered ribbons ?i dont know it uses some type of glue , this is the main ribbon...Leave a comment:
-
Re: SONY KDL60-NX801 Panel
Hi Guys
Thanks for all your inputs ,i have opened the lcd to its wafer and put it back same issue , only thing is that I have the side covers still out since its the outside frame ,the bottom ribbon that connects to lcd gets hot (the side that has problem) the other side stays cool
I didnt see and burn marks on the side ribbons .
I might have to change the LCD any idea where I can get this ?Leave a comment:
-
Re: SONY KDL60-NX801 Panel
[attach]170056[/attach]...Leave a comment:
-
Re: SONY KDL60-NX801 Panel
[attach]170053[/attach][attach]170053[/attach]
[attach]170054[/attach]
[attach]170055[/attach]
bottom and side picturesRe: SONY KDL60-NX801 Panel
[attach]170053[/attach][attach]170053[/attach]
[attach]170054[/attach]
[attach]170055[/attach]
bottom and side picturesRe: SONY KDL60-NX801 Panel
[attach]170053[/attach][attach]170053[/attach]
[attach]170054[/attach]
[attach]170055[/attach]
bottom and side picture...Leave a comment:
-
Re: SONY KDL60-NX801 Panel
there is nothing connected from sides , only 2 ribbon from bottom to each side
ThanksLeave a comment:
-
Re: SONY KDL60-NX801 Panel
whats side penal drivers ?Leave a comment:
-
Re: SONY KDL60-NX801 Panel
[attach]170036[/attach]...Leave a comment:
-
Re: SONY KDL60-NX801 Panel
right side half is good as it can be no issue but when i connect left side ribbon to tcon its outs me in 5 blinks ,i pulled apart the tv right now so i cant take any pictures
ThanksLeave a comment:
-
Re: SONY KDL60-NX801 Panel
thanks DSKLL
what is pcb board and where does it normally is located /
thanksLeave a comment:
-
Re: SONY KDL60-NX801 Panel
hi
I have a kdl60w850b with screen issue , one side puts mt tv to 5 blinks alarm , using just one side ribbons from t con works fine but only half screen , anyone has any options ?
I might need new screen sine i swapped the ribbons from tcon from left to right and problem didn't follow and stayed issue with one side , also tried new tcon board and all voltage in good specs .
thanksLeave a comment:
No activity results to display
Leave a comment: