rodtoo401
New Member
Last Activity: 11-27-2021, 07:11 PM
Joined: 01-18-2018
Location: Newport News,Va
-
Need Help Gigabyte Gigabyte GV-RX570Gaming-4gd rev-2.0
I have picked up a Gigabyte GV-RX570Gaming-4gd rev-2.0. I have narrowed the problem down to a bad NKS GS7103 ,RFG7LAKVS. I can find the GS7103 all over the web.Here is the problem ,the number below the GS7103 does not match the one that is bad .That number is RFG7LAKVS closet I can find is RFG7LAKWA. Thanks at this point I am pulling my hair out. SO what will work is what I am asking . -
Re: Asus P8Z77-V PRO PCIE-X16 bad
DID that and all pins straight , even tried different CPU same thing PCi-E X16 slot dead... -
Asus P8Z77-V PRO PCIE-X16 bad
I have a Asus p8z77-v pro that the x16 slot went out on the x8 still works . I would like to get it to work again as I want to run SLI on the board. So anywhere to start as to find the trouble ? I can put in a powered by the slot VGA card and it is getting power but does not show up in bios or O/S -
Re: Asus p8z77 v lx
I downloaded Fritzing and Can`t open the files: parse error [1] at line 1, column 1: error occurred while parsing element. Please helpLeave a comment:
-
Re: Asus p8z77 v lx
I have tried 3 PSU on it and battery is good, different ram and CPUs. I do have 2 mosfets that I read continuity between source and gate by the ram slots .They are A09 N03N CDL0358. So Maybe bad ? Keyboard is a PS/2 and have tried usb too.Leave a comment:
-
Re: Asus p8z77 v lx
I can not get into the Bios at all, the keyboard stops working .The lights on it come on and that is all> I have tried a p/2 keyboard and usb no luck with either. As it starts to boot I can get the caps lock key to work and that stops, as soon as boot Asus screen comes up .All the socket pins look good and straight. I have tried changing out ram and, CPU, power supply nothing changesLeave a comment:
-
Asus p8z77 v lx
I picked up this motherboard. When I try to boot it .The motherboard stop at the ASUS boot screen and that`s it . No keyboard, light comes on for it that`s all .Does anyone have an idea where to start looking for the problem? I have a bios chip programmer .That has been done and tried from the first to the last bios and new bios chip. Where to look for the problem ? -
Re: New Members - please post your introductions here
Just joined I hope I`m able to learn as I have been playing around with computers starting in 1999 . I want to learn as I`m always learning. I know sounds corny, If you try, you can learn something everyday.
Leave a comment:
No activity results to display
Leave a comment: