Re: Thermistors exceeds critical temperature - HP Elitpad 900
I measure between 40 - 45 degree Celsius on a Hynix H9TKNNNBPDMR chip.
See attachments for pictures.
For what i know it's not really a critical temperature?
I tried to start-up with cooling spray on the hottest part (Hynix chip). But still the same error appears and system is not booting.
Can it be some kind of faulty temperature sensor? (Where to find that sensor?)
Or maybe some software lock (how to (factory) reset a chip?)
Hopefully someone can...
MartijnG
New Member
Last Activity: 06-03-2021, 08:56 AM
Joined: 01-17-2018
Location: Amsterdam
-
Thermistors exceeds critical temperature - HP Elitpad 900
Hi,
When i started my tablet HP Elitepad 900, i go out of nowhere this error: “One or more system thermistors exceeds critical temperature. System will shutdown in 5 seconds…”
I didn't change everything and it was running fine before. I cant start my tablet anymore, also in bios/boot option the system shutdowns.
Does someone know how to fix this error or where to look at?
Model: HSTNN-C75C
Motherboard: QPJ80 LA-8781P , SPS: 724353-001
Thank you!
Greetings,
Martijn -
Re: Samsung UE32ES6100WXXN. Not working, No Standby light
Is there any flash bin file for the eeprom on the Samsung BN41-01812 main board?Leave a comment:
-
Re: Samsung UE32ES6100WXXN. Not working, No Standby light
No i didn't. How do i reflash the memory IC?
ThanksLeave a comment:
-
Re: Samsung UE32ES6100WXXN. Not working, No Standby light
Thanks for the reply again.
I hope others will help me further.
I plugged the cable out the back of the TV. Then back in (the cord had already power) the TV.
I saw some sparks when plugged in, just at the metal pins of the connector. From my experience its normal. I think it was just some conduction sparks. I don't see any sparks on the boards.Leave a comment:
-
Re: Samsung UE32ES6100WXXN. Not working, No Standby light
Thanks for the reply. So even with a corrupt flash memory the main board can power off the power with the power on/off signal? What do you think is the best option? Search for the flash chip on the main board and replace? Or any kind of reset?
I hope we can figure something out..Leave a comment:
-
Samsung UE32ES6100WXXN. Not working, No Standby light
Hello All,
I got a strange problem with my Samsung TV UE32ES6100WXXN.
PSU model = BN44-00517A
Main board model = BN41-01812(A)
TCON board model = BN41-01789A
Living in Europe
[B]Observation:[/B]
No standby light when plugged into the power.
TV won't power on, with remote or button on tv.
[B]What probably happend:[/B]
I was messing with the service menu, didn't change parameter.
Then somehow the menu was frozen so i disconnected the power.
Plugged in again (some sparks) and it didn't turn... -
Re: New Members - please post your introductions here
Hi there, just hoping to fix my new TV.Leave a comment:
No activity results to display
Leave a comment: