Re: Hanns G HW191DP inverter board, in need of Help.

Forgive me the problem presented like a previous monitor I had (that required caps and mosfets, apparently it was a common problem and was able to find a kit with all the needed parts.) At first it was slow to respond after hibernating then, it would come on for a few seconds then go dark, image viewable with a flashlight, indicating inverter of back light. The monitor would finally come on after a few power cycles. at this point I stopped using it and began disassembling the monitor.

I've replaced many caps mostly...

Re: Hanns G HW191DP inverter board, in need of Help.

I apologize for the inline pictures I didn't know how to put them in as an attachment and I couldn't edit the post to change them to URL.

Thank you for you good advice I'll check those links out.

Re: Hanns G HW191DP inverter board, in need of Help.

So I've found it to be a TJ777 VP-775 Power Supply Board. If that help.

Hello,

This is my first time posting here, I found this site very useful in repairing the inverter board in my Westinghouse 1975NW. I now have a similar problem with a Hanns G HW191DP. I haven't been able to find much information on it and i was hopeing someone here, with a little more experience, might be able to shed a little light on my situation.

I will start by replacing the electrolytics, but I was wondering if any other components would need replacing as did in the Westinghouse model (a smd fuse, and 2 mosfets.) I'm sure I can test the 3 red fuses myself but...