Re: Grundig Vision 7 37-7851T hard to turn on

I just noticed this as the tv was previosly repaired by some guy.

Originally there was 2x 680uF 35V but now there is 4x 470uF 35V.. Could this be the issue?...

Re: Grundig Vision 7 37-7851T hard to turn on

I got the replacement cap from an old power supply for a pc as i didn't have any others on my hand i guess it was bad but it worked for some time..

Any cheap ESR meters that you would recommend?

Re: Grundig Vision 7 37-7851T hard to turn on

They didn't look blown out or puffed so i didn't noticed any... If i measure the capacitance with a multimeter will it measure right if the cap is soldered on the board? I mean will it give the correct value?

So i have this tv for like 7 years no issues and like a month or two my tv started having issues when turning on the light blinks like its going to turn on and then the light lights up bright as the tv wasn't even turned on and no picture on the tv. So you have to turn on the tv for like 10-15 times in order for it to turn on and when it turns on (on hdmi input) when i turn on my satellite it turns off for some reason but if i leave it running on the blue screen while my satelitte is off for a half an hour you can watch the satelitte with no issues... I already replaced 1 capacitor when the tv...

Re: New Members - please post your introductions here

Wsup guys, i'm from croatia trying to fix my tv so i can use it for ps3/else..