Re: philips freeby

The power supply led flashes green 3 times. VSCAN voltage drops to zero (or climbs). I unplugged the power feed cable to the y-sustain board and the error codes go away and VSCAN voltage remains at -190VDC. Which components on the psu control the Vscan that I can change? I would prefer not to swap out psu as its expensive. Thanks for any help

Re: philips freeby

I have this same model tv 42PF7220A with the same 7 flashing red light indicator. I opened it up to get a look at the power supply but I see no blown or bulging capacitor. Should I just replace the same two capacitor the original poster BADHIGEEN replaced? Are those two particular capacitors usually the problem? Or should I just go ahead and try to replace all the capacitors? All the capacitors I have are flat and don't appear to have been blown out.