Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
hello. I have one Samsung UE55MU6105K that is always turno one and off and no logo. So i think that could be software....
-
Re: Samsung UE55NU7026K always restart
i made jumper between the FB_TRDY_1 and FB_TRDY_3 but same problem. I will buy a used mainboard for test. Then i wiil write results. i am afraid that panel have something wrong, but need to find
Leave a comment:
-
Re: Samsung UE55NU7026K always restart
Here the photos from TV...
Leave a comment:
-
Re: Samsung UE55NU7026K always restart
I forget to tell that already take out the flat cable to the panel from mainboard. For now it is not the panel.
Leave a comment:
-
Samsung UE55NU7026K always restart
Hello
I have one LCD TV SAMSUNG [B]UE55NU7026K[/B] and it starts, blink 2 times led, backlight on then about 4 seconds, restart again, but no logo appears on the screen. I disconect the power supply cable to the Mainboard and power is ok and backlight also ok.
With the mainboard[B] BN94-12869G [/B]connect, the voltages are ok, 13 Volts and 3,3 Volts also.
I know that the problem is mainboard, but could be the software?
I try to find firmware for this mainboard but canĀ“t find
Can any one give me some help?
Thank youHello
-
Re: Samsung UN55MU6103F IC1604 dump
I tested and it works. Thank you very much. The only thing that not correct was protect SREG1 need to be 88 and only 8A. So i tested and tv starts again can it be like SREG1 8A?
Leave a comment:
-
Re: Samsung UN55MU6103F IC1604 dump
Hello
I have one UE49MU6405U with no boot problems. I have the Ic1603. It is possible to fix it?
Thank you...
Leave a comment:
No activity results to display
Show More
Leave a comment: