Re: Samsung PN51E450A1FXZA won't turn on, no standby light

I ended up buying [URL="http://www.shopjimmy.com/samsung-pn51e450a1fxza-ts01-tv-repair-kit-version-1.htm"]this kit[/URL] from ShopJimmy, which has all the boards and began swapping them in order of suspected damage.

When I swapped the main board I finally got power and could hear the turn-on melody but had no picture. I then swapped the control board and finally got a picture but it has a broken vertical line of pixels at the right end of the display the appear green on a black background and purple...

Re: Samsung PN51E450A1FXZA won't turn on, no standby light

Thanks, I tried that but get nothing at all, no standby light, no clicking, no display, etc.

Re: Samsung PN51E450A1FXZA won't turn on, no standby light

Thanks, is there an easy way to determine if this mainboard is bad, eg expected voltages at certain pins?

Looking for help with a Samsung PN51E450A1FXZA that won't power on and has no standby light. TV belongs to my mother, who says it worked fine until her cat messed around with the power strip into which it was connected knocking the strip's plug out of the socket...she heard a short zap, and ever since it's been dead.

Visual inspection shows no obvious issues, power cord is good, no puffed capacitors, no scorching, etc.

Power supply is model BN44-00509B. With power supply connectors removed I see the following A/C voltages:

Connector CN801 (main board)...

Re: New Members - please post your introductions here

Hello, writing from Denver, CO to look for help with a Samsung PN51E450A1FXZA TD02.