Re: Vizio E75-E1
Okay, thank you. I'll will try it
GAStuntman
Senior Member
Last Activity: 09-13-2021, 03:16 PM
Joined: 12-09-2017
Location: Warner Robins
-
Re: Vizio E75-E1
Anyone??? ��Leave a comment:
-
Re: LG 55EC930V - Sound but no image - Please help
Have you tried using a backlight tester in the tv? Normally when I get a tv with sound & no picture the issue is back lights.With some models such as the LG TVs there is an issue with the main board as well.Leave a comment:
-
Re: VIZIO E50-C1 spotty / blotchy backlight?
Normally when there is discoloration the diffuser caps over the leds may have popped off. Have you opened the tv yet?Leave a comment:
-
Vizio E75-E1
I have a Vizio E75-E1 smart tv. When powered on the entire screen lights up white. No menu or any apps show up when pressed. The t-con board has been replaced. Vizio stated with the e-series the cause was the t-con but that didn't fix the issue. Could there be something wrong with the main board? I'm open to suggestions. Thanks in advance. -
Re: Sony xbr-75x940d
I tried s different flash drive but I'm still getting the same flashing light. I'll try a different firmware tomorrow.Leave a comment:
-
Re: Sony xbr-75x940d
Ok. I will try a different flash driveLeave a comment:
-
Re: Sony xbr-75x940d
So, when I turned the tv back on today I had the flashing orange/green light.Leave a comment:
-
Re: Sony xbr-75x940d
Sorry I'm just responding. The red light is flashing but I'll have to see if it's a sequence or not. I had to turn the tv off due to a thunderstorm in my area.Leave a comment:
-
Re: Sony xbr-75x940d
no he didn't. It has been over an hour. I pressed the power button and this time the indicator turned white for a few seconds and now it's blinking red.Leave a comment:
-
Re: Sony xbr-75x940d
Ok, thanks. The flash drive have been running for almost an hour now. It's still pulsing as of now.Leave a comment:
-
Re: Sony xbr-75x940d
Yes, it turned green and then white and I heard a click and the tv went off with no light. Came back on and started flashing orange and green again. I inserted the flash drive for the firmware after about 45 minutes after the light turned green. After inserting the flash drive. The light is still flashing the same colors but at a slower pace. I can see the flash drive is working because it's red and flashes from time to time but it's hard to tell if anything is actually happening because I cannot see anything on the tv as of now.Leave a comment:
-
Re: Sony xbr-75x940d
I tried it again and it turned greenLeave a comment:
-
Re: Sony xbr-75x940d
I have tried holding down the buttons and it's still flashing. The firmware should be the right version since I just downloaded it from the Sony website for this particular model tv. As soon as I connected the mainboard and turn the power on, the orange & green light was flashing trying to install the firmware.Leave a comment:
-
Re: Sony xbr-75x940d
Thanks, I will give that a try.Leave a comment:
-
Re: Sony xbr-75x940d
Yes, the main board is the correct board and I did order it from shop jimmyLeave a comment:
-
Sony xbr-75x940d
Hi, I have a Sony tv that did not have a mainboard in it. I guess the previous owners took it out. I'm not sure. I bought a replacement main board and installed it. Now I'm getting a flashing orange & green light when I turn on the tv with no sound or picture. I have been researching the tv but all I was able to find is the flashing orange & green light means the tv needs a firmware update. So far, that hasn't fixed the issue. Any suggestions where to start? -
Re: Element ELSW3917BF
I think the board I received was a bad board. The replacement board is doing the same thing as the original bad board. Now, I’m wondering if I can use both boards to make one good board or should I just order another board.Leave a comment:
-
Re: Element ELSW3917BF
The capXon has 172 v and no burn holes in the component. Each leg on the component is showing mv on the outside legs & 0 voltages on the inside leg. I’m getting voltage on the hot side but it’s fluctuating from 10 volts to 12 volts back to 10 and so forth. It’s cycling powerLast edited by GAStuntman; 02-03-2019, 01:47 PM.Leave a comment:
-
Re: Element ELSW3917BF
I get 3.6 voltage on the component circled in red but no voltage on the one circled in yellow....Leave a comment:
No activity results to display
Leave a comment: