Re: Need resistor help
Ok I'm stuck on what way to go need more help. I followed this flow chart and unplugged ss11 and ss33 tv doesn't stay on. So per chart removed sc2 and sc20 and now got 6 blinks. So next is to remove all 4 screws from the su/sd boards plus the three connections. Then jumper sc50 and if tv stays on sc is good and su or sd bad but if still no good and 10 blinks it the sc still correct....
Fordman
Member
Last Activity: 01-21-2018, 09:55 AM
Joined: 12-08-2017
Location: Fort Dodge
-
Last edited by Fordman; 01-14-2018, 02:37 AM. -
Re: Need resistor help
[ATTACH]169122[/ATTACH]
I checked the Q16601 mosfet it checks out fine what else do I need to double checkRe: Need resistor help
[ATTACH]169122[/ATTACH]
I checked the Q16601 mosfet it checks out fine what else do I need to double check...Leave a comment:
-
Re: Need resistor help
Ok I'll check that out before I order parts. Think these are a better match than the others lifted.
[ATTACH]169073[/ATTACH]...Leave a comment:
-
Re: Need resistor help
No I don't. WhenI plugged in and turned on seen the flash abs pop of the resistors so just thought only that bad.Leave a comment:
-
Re: Need resistor help
[ATTACH]169071[/ATTACH]
So based on the info these should work to replace my two blown resistors.Re: Need resistor help
[ATTACH]169071[/ATTACH]
So based on the info these should work to replace my two blown resistors....Leave a comment:
-
Re: Need resistor help
Sorry for all the stupid questions I'm a noob just trying to diy my tv since money's tight so can't afford a new tv.Leave a comment:
-
Re: Need resistor help
Wouldn't the diode being backwards cause my blown resistors.Leave a comment:
-
Re: Need resistor help
I put in d16618 backwards unknowly and powered up and popped the resistors. So trying to repair them to see if my board works after I put the the repair kit from shopjimmy.com.Leave a comment:
-
Re: Need resistor help
Ok thanks I was just going off the board position as what part I needed.Leave a comment:
-
Re: Need resistor help
So the R601 and R609 isn't the right things. I want the R16601 and R16609.Leave a comment:
-
Re: Need resistor help
So what would you suggest to use for size.Leave a comment:
-
Re: Need resistor help
[ATTACH]168922[/ATTACH]
[ATTACH]168923[/ATTACH]
No I don't think so at all.Re: Need resistor help
[ATTACH]168922[/ATTACH]
[ATTACH]168923[/ATTACH]
No I don't think so at all.Re: Need resistor help
[ATTACH]168922[/ATTACH]
[ATTACH]168923[/ATTACH]
No I don't think so at all....Leave a comment:
-
Re: Need resistor help
I think it's different [ATTACH]168887[/ATTACH]...Leave a comment:
-
Re: Need resistor help
The only other Mohm resistor is R507 but can't find it any where at all on the board.Leave a comment:
-
Re: Need resistor help
Yeah that's what digikey and mouser say 6.2Mohm is rare and a high valueLeave a comment:
-
Need resistor help
Trying to repair a sc board for a TC-P50S2. I put a parts in and got one doiad backwards and fried two resistors. Having a hard time finding the r601. Looking for help from someone that knows more about resistors than me. Open to all options to fix.[ATTACH]168847[/ATTACH]
[ATTACH]168848[/ATTACH]Trying to repair a sc board for a TC-P50S2. I put a parts in and got one doiad backwards and fried two resistors. Having a hard time finding the r601. Looking for help from someone that knows more about resistors than me. Open to all options to fix.[ATTACH]168847[/ATTACH]
[ATT... -
Re: Tnpa5101 help
found a service manual and values of them both now a good place to buy. Looked on digi-key but didn't find any.[ATTACH]168564[/ATTACH]...Leave a comment:
-
Re: Tnpa5101 help
there's a parts board on eBay for 21 shipped, or there's a new board from China for 85 shipped don't know what one to do. What if I messed up more than I thought on the repair board.Leave a comment:
-
Re: Tnpa5101 help
Tnpa5105abLeave a comment:
-
Re: Tnpa5101 help
TC-P50S2 is the tvLeave a comment:
No activity results to display
Leave a comment: