Re: Please help me identify bad Caps in Mobo

All caps that i have seen on this board are KZG and else are solid caps that i don't know their manufacturer name.
I'm away from the board now, i'll check again tommorow.
Thank you all for the help!

Re: Please help me identify bad Caps in Mobo

what the bleep is a Nichicon?!

Re: Please help me identify bad Caps in Mobo

Just to be on the safe side, in case i misunderstood i'll ask again (i can be an old fart too).
are these caps bloated or not? all other caps on the board are from same manufacturer and have straight heads.
Thank you for your understanding, I just need to be sure.

Re: Please help me identify bad Caps in Mobo

are you talking to me?!
I was wondering if these Caps can be the source of my problems.
If so, maybe I will recap them with one of the cap you recommended.
I've seen caps with bloated heads like this on different boards, but on this board, these are the only ones, all caps from the same manufacturer.
Please tell me if this can be the problem befor i'm firing my soldering gun
Thank you.

Re: Please help me identify bad Caps in Mobo

Hi!
I just disassembled the board.
All caps have KZG written on them, are KZG not good?
All with straight heads, only these two are little bloating.
I think these are the only one of it's kind on this board spec'wise.
Thank you.

Hello all!

This is my first post so if i have made a mistake in publishing this post in the wrong forum please forgive me.

Now to the problem,
I have a DFI Lanparty board, with NF4 chipset socket 939.
It have a problem of random crashes with no matter the work i'm doing.
It can be stable for hours or crash after half an hour.
I disconnected all components and tesed it again, still crashes.
I looked over the whole board and psu for signs of bad caps and found only one issue:
The PSU looks ok except tons of dust, The mobo has...