Re: Panasonic 58-TXAX802B Stuck on Panasonic Logo
Anyone manage to find a dump for this ?
OCBSlimz
Member
Last Activity: 01-15-2025, 05:10 AM
Joined: 11-23-2017
Location: Matrix
-
Re: Emmc reading philips rt809h
Many will have the dreaded black screen on this, Philips are renowned for implying CPU keys withing their nand / emmc. If they do not marry up, you will get a black screen.
you need to keep BOOT1 and BOOT2 from your original dump, you only need to flash USER
HOWEVER this all depends on the bootloader. Its hit and miss, i have had about 45% success rate out of these boards.
There is only one programmer I know of that can extract CPU keys from dumps and it isn't available unless you live in Russia.
...Leave a comment:
-
Re: Emmc reading philips rt809h
Any solutions to get this to work using a donor dump?
Or is it tied to the CPU?Leave a comment:
-
Re: Tv sony kdl-40nx710 cyclic restart after logo
Did you ever find the dump for this?Leave a comment:
-
Re: Philips Compair II Software
What is used today ?Leave a comment:
-
Re: Philips Compair II Software
Hi
Ever find a solution for this ?Leave a comment:
-
Re: Eeprom dump thread!
Ive got a programmed EMMC for this, get in touch...Leave a comment:
-
RT809H External QFP48
Hi Guys
I'm trying to program a WELTREND WT61P805 QFP48 chip externally using a RT809H programmer.
Before you ask, yes i do use it sometimes with VGA ISP and works perfectly.
I have an external QFP48 socket that i would like to use witht the programmer.
I doesnt work this way normally and have to use ISP... Bummer....
I would like to know if the device can be added ? If so how? bit of a progressive beginner me on the RT809H.
If no, how can i use this to wire link the ISP and external QFP48 socket adapter.... -
BN41-01660B Blinking LED
Hi guys
I have a bunch of these mainboards that give me blinking LED errors. 5 times
Some blink slow some fast some both..
Ive heard that the CPU can be at fault for this.
But befre I start reballing CPUs can anyone give me any pointers on fault fnding with these ?
Any help would be greatly aprreciated.
BTW these boards DONT need a NAND change nor an EEPROM change. (done that already) -
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
Would anyone happen to have the service manual for this. ?
I managed to do a clean dump of the the NAND chip and firmware chips if this would help anyone
MattLeave a comment:
-
Re: Service Menu And NAND Flash KFG1GN6W2D For Samsung TV UE32D6100.
I have a reboot cycle, after a bad update.
Was looking for a dump of the OneNand chip..Leave a comment:
-
Re: Service Menu And NAND Flash KFG1GN6W2D For Samsung TV UE32D6100.
Hi
I know this dates back a bit but did you find a solution for this ?
I have the same problem ...
MattLeave a comment:
-
Re: Ue65f9000
Unspun did you find a solution for this ?Leave a comment:
-
Hi Stevie,
Been looking for over a week now for an access to remont-aud net, i came across this post and come to you for help, could you get me a file or provide access ?...Leave a comment:
-
Re: New Members - please post your introductions here
Hi
Thanks for letting me in
Leave a comment:
No activity results to display
Leave a comment: