Agent24 under every ICs there are brown hard glue. BTW i tried to replace those all main IC, all three of it, with my friend's focus fx650, now it stable, i returned the IC to the owner and order new online, the problem is, those ic not always in stock so need time pre order from china with ali express. with good IC it can stable even to load i5 12600K + RX6800 gaming for few hours, and 12v rail is stable at around 12,1v...

the SSD is fine, just reformated and reinstall windows with different PSU.
the PSU lose power, just like turn off it switches and power it on in a second, so PC start reboot/POST again.

i just remembered this may cause my old Radeon RX560 GPU to fail with this PSU.

so basically this PSU is fine as long not loaded high enough.

yesterday I resolder(remove chips, clean, and resolder with low temp solder) all its chips(APFC Controller, Resonant Controller and Supervisor IC), now 12v rail only 11,9v, i think there are problem in those IC's. oh and I measure...

CapLeaker, it just reboot, while on process, in the past while in gaming also sudden reboot, just like it lose power for a second.

so basically it is start normally, 12v rail slight higher to 12,3 vdc(from other review it should be 12,05-12,1v, at max full load should be 12,02-12,05v,
so if schematics and boardview exist would be better for me to check it...

yes sir, but in 2021 I already try to clean inside of it, the warranty seal already broken

i need help for this PSU, it is old way back to 2018, bought it, but after 2 years, with Ryzen 3 3100 and RTX 2060, it sometimes make the PC reboot when gaming(RTX 2060 full load), it used on ITX Silverstone SUGO SG11 case, so probably got heat often, i don't have schematics and boardview, any help please, where to start looking? well it just feel bad to see good things damaged like this

(few months ago, i try to power i9 14900K+RTX 4060 with this, and it restarted while install Windows, and corrupt the SSD)