Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
alh84001
New Member
Last Activity: 09-13-2022, 01:35 PM
Joined: 10-26-2017
Location: ZG
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • LG OLED65W8 suddenly died

    So, my LG OLED wallpaper TV was on in the background, and at one moment it just died - picture turned dark, no sound, nothing. Its speakers, that normally slide down when TV is off, were just stuck in the drawn out position. Pressing the remote control on/off button yielded red LED blinking a couple of times (I think it's couple of times, this was actually some time ago) and that's the only sign of life.

    Unfortunately TV is out of warranty period, but I took it to the official LG service shop, to diagnose the problem. They needed to wait for some extra part to be able to do it (whole...
    See more | Go to post

  • Re: samsung 32 ln32b360c5d no power no indicator

    Thanks guys on all the help. I'll go out tomorrow and get the caps for it.

    Two questions though:
    1) What is the cold and what is the hot part of the power supply? I mean in general? in this board I presume that would mean exchanging those seven caps in the lower left in my picture?
    2) Can I put higher voltage caps in place of the lower ones? E.g. I have a 1200uF 35V one available, and CM852 is 1200uF 10V while CM876 is 1200uF 25V?

    Edit: Success! I replaced that single cap, and now it turns on....
    See more | Go to post
    Last edited by alh84001; 10-26-2017, 04:51 PM.

    Leave a comment:


  • Re: samsung 32 ln32b360c5d no power no indicator

    Here is also a picture of the board. Area around those fishy diodes is suspiciously darker than the rest of the board, as well as the area to the top of the leftmost cooler in the picture. Bottom of the board has no visible damage anywhere. Top of the CM852 (1200uF, 10V) capacitor looks slightly convex (other capacitor tops are concave), but it doesn't look blown to me....
    See more | Go to post

    Leave a comment:


  • Re: samsung 32 ln32b360c5d no power no indicator

    Hi all. I'm a complete n00b when it comes to this, so bear with me.

    My father has a Samsung LE32B350 TV with a BN44-00289B power supply inverter. It started going crazy - turning on and off by itself, and then after a week or two it went completely dead.

    I took the board out connected it to mains, and got the following DC voltage readings from the CN802 pins with black probe on pin 16:
    1 - 0,77
    2 - 5,20
    3 - 0,00
    4 - 13,19
    5 - 0,00
    6 - 0,00
    7 - 5,20
    ...
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X