Re: Turboexpress components
A faulty Game Gear should cost less than $10 They suffer from bad caps so the coil will be fine.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: Lenovo G70 Screen backlight
The fuse is the one with a 0 on it.
Leave a comment:
-
Re: need board view for Apple A1278
Hi does any one have the board view for 820-2523-A??
Leave a comment:
-
Re: need board view for Apple A1278
Well by the power of Grey Skull (and some Google Fu!) I share the spoils!
Teh Board View:...Last edited by VaNDAL_UK; 12-02-2016, 07:01 AM.
Leave a comment:
-
Re: need board view for Apple A1278
Hi,
Can anyone hit me up with a board view for the MacBook Pro 15" a1287 820-2533 (APPLE K19i_Cornholio_K19 PVT 051-7903 820-2533 revA A1287) please?
I have the schematic just need the board view.
Thanks,
Leave a comment:
-
Re: PS3 Controller
Sorry bud, those are completely the wrong ones and the caps. You may find those in cheap knock off clone pads but never in the originals only ALPS.
The caps are a specific shape and size as well so you have to be carefull what you buy when fixing controllers. Quite subtle differences....
Leave a comment:
-
Samsung 40" LCD Sound No Picture LE40D550K1WXXU
Hi,
I have a Samsung 40" LCD (LE40D550K1WXXU)
I this is giving me no display but has sound. I can see a faint blue hue to the screen (mostly edges and is faint) so I suspect the back lights are working. No Menu or channel display.
I have a feeling its the T-Con board.
Here is a Pic:
[ATTACH]73807[/ATTACH]
I havn't checked it yet but I rekkon it's going to be the white Fuse. Center left by the ribbon cable from the logic board.
Can Anyone confirm the syntoms and the fix?
...
-
Re: SwissTek T42 Dead Power Supply LJ44-00092C
Thanks for the info!
The caps on the vdd wich I assume is the area I highlighted in the attached picture are 25v / 35v
[ATTACH]73384[/ATTACH]
So.. I'm going to order BZX79-C22. NXP Diode, Zener 500Mw 22V goes upto 75V I think.Re: SwissTek T42 Dead Power Supply LJ44-00092C
Thanks for the info!
The caps on the vdd wich I assume is the area I highlighted in the attached picture are 25v / 35v
[ATTACH]73384[/ATTACH]
So.. I'm going to...
Leave a comment:
-
SwissTek T42 Dead Power Supply LJ44-00092C
Hi,
I was wondering if I could get a little help / advice?
I have a totaly dead SwissTek T42 plasma I suspect it's the Power Supply:
Samsung LJ44-00092C (infact this whole TV is Samsung)
Now I've found a Repair Kit that fixes the dead PSU:
[URL="http://www.ohmsupplies.co.uk/LJ4400092C-PSU-REPAIR-KIT"]http://www.ohmsupplies.co.uk/LJ4400092C-PSU-REPAIR-KIT[/URL]
The caps are neither here or there since this thing is dead. I'm intrested in the IC101 and ZD101. I suspect one or both have poped!
I can...
-
Sanyou Relay Alternative
Hi,
I was wondering if anyone can help with finding me an alternative to this: Sanyou SJ-S-112LM
Here is a pic of the part.
I belive it discontinued and unfortunatly I'm not confident enought to source a replacment.
Doesn't need the pins to be in the same place because I can hotglue it somwhere and run the wires.
Any suggestions will be helpfull.
Thanks!...
-
Re: HP pavilion dv7
Have you tryed the "Blind" Bios recovery proceedure?
I'm guessing a corrupt bios.
Leave a comment:
-
Re: MSI Wind U135DX Charging Issue
I found this on the Maxim 8724e IC. Page 6 look interesting with MAX8724 EV Kit Component Placement GuideāComponent Side
[URL="datasheets.maxim-ic.com/en/ds/MAX8724EVKIT.pdf"]datasheets.maxim-ic.com/en/ds/MAX8724EVKIT.pdf[/URL]Re: MSI Wind U135DX Charging Issue
I found this on the Maxim 8724e IC. Page 6 look interesting with MAX8724 EV Kit Component Placement GuideāComponent Side
[URL="datasheets.maxim-ic.com/en/ds/MAX8724EVKIT.pdf"]datasheets.maxim-ic.com/en/ds/MAX8724EVKIT.pd
Leave a comment:
-
MSI Wind U135DX Charging Issue
Hi all,
I'm after a little help with his Netbook.
First of all it work as far as plugging in the cord the system boots to windows an runs stable for ever (5hrs with updates going on).
However Windows cannot detect the battery "Pluged in battery not detected"
No voltage on the outer pins on the battery charging socket but get about 2.5v on the inner pins, battery shows no voltage. When the battery is inserted the charging light comes on and is solid green.
Taking alook at the picturs( best I could do in daylight,...
-
Re: Samsung B2330H Dead
Got it all working now!! Typing using the monitor now.
I decided to remove the over heating component from the touch board.
Thanks for all the dedicated help!
Leave a comment:
-
Re: Samsung B2330H Dead
OK had abit of luck frustratingly!!
Swapped back to the original powerboard and plugged everything in still dead.
Unplugged the touch board and the monitor sprang into life with a difference!! The screen is nolonger white and is displaying fine!
However plugging in the touch board shuts the monitor down. There is a very small black component on the touch board right behind where you press for the power, this component get very hot!
I have took some readings from the AV board with the touch bard connected...
Leave a comment:
No activity results to display
Show More
Leave a comment: