Thanks very much !!
I guessed the capacitance just wasn't sure about the voltage.
shortcake1972
New Member
Last Activity: 06-22-2017, 11:38 PM
Joined: 08-22-2010
Location:
-
Re: Identify caps
Thanks very much !!
I guessed the capacitance just wasn't sure about the voltage. -
Identify caps
Hey all.
Please can someone identify the 2 caps in the photo please.
I'd like to replace them.
Cheers
...
-
Re: Samsung PS43D450 Plasma - smashed screen
Thanks for the reply, i was hoping someone could get me the P/N off the back of the PDP as i don't have the T.V yet.
I've seen a Pioneer 43" screen for sale, could i use that as a replacement ?Leave a comment:
-
Samsung PS43D450 Plasma - smashed screen
Hi all,
Just a little advice please - i've been offered this T.V, hardly used with broken screen. Wondered if any one had the part number of the screen so i can source a replacement please ? -
Re: Advice needed regarding a broken charging circuit on a lappy
Many thanks in helping me with this....
Page 35: VIN and P2 measures 19v
Page 36: P2 and R254 also measures 19v
BR...Leave a comment:
-
Re: Advice needed regarding a broken charging circuit on a lappy
Bump.....
A few peeps have viewed the PDF...... any ideas please ?Leave a comment:
-
Re: Advice needed regarding a broken charging circuit on a lappy
Hello all,
Since i have the exact same fault on a different laptop mobo i thought i'd continue this thread rather than starting a new one.
Fault - works perfect with a battery but when the AC adapter is plugged in it won't power up or charge the battery.
On the plus side i managed to source the schematics for it (thanks Google !) which i have attached for you all to examine.
I am a bit of a newb when it comes to complex circuits but i know how to use a multimeter and i can solder...Leave a comment:
-
Re: Acer AL1916W Ab Monitor, DAC-19M008 - No Backlight, Recapped, Can see with Flashl
Hi all,
Just wondered if you had any success with this Inverter ?
I have the exact same inverter with similar fault (CCFL not working)
I have also replaced both IC201 & IC202 as well 4 bulging caps.
I also replaced fuse F200 but as soon as i soldered it in place it popped straight away !
Any ideas would be greatly appreciated
Leave a comment:
No activity results to display
Leave a comment: