Re: Dynex DX-LCD37-09
Results...
I pulled the plug off. Rounded off the burnt spot and soldered the wires on the board.
Plugged the set in and it still had the arcing. But I ended cleaning the wires off. Actually washing the wire with a paper towel. It felt like something was on the wires. Doing that drastically cut the arcing.
Tv has been on for over an hour now..
buzzstpoint
Member
Last Activity: 05-28-2022, 08:24 PM
Joined: 08-18-2010
Location:
-
Re: Dynex DX-LCD37-09
Got ya.. Time to warm up my soldering iron.....Leave a comment:
-
Re: Dynex DX-LCD37-09
But then my 2nd question would be... Why would that plug burn up? I should be able to solder the wires direct to the board, Correct?Leave a comment:
-
Dynex DX-LCD37-09
Having some trouble with my LCD. While watching tv it shut down. I kept turning it on but would shut off. It still turns on and the screen lights up but there is some arcing on wires inside and a burnt plug.
[URL="https://plus.google.com/photos/116444296527356331655/albums/6051229576042970545?authkey=CO3q3YCsuMfCVQ"]Video of arcing[/URL]
Anything I should start to test?Having some trouble with my LCD. While watching tv it shut down. I kept turning it on but would shut off. It still turns on and the screen lights up but there is some arcing on wires inside... -
Re: HP L1740 Monitor doesn't light up
Wonderful Customer Support..
No argument or questions asked.. Two thumbs up!...Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
Ok,
I sent an email to the customer support about the missing cap. I'll let you all know how they respond.Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
[B]All fixed!![/B]
I replaced all the caps I had. Plugged it in and it lit right up.
Looks good and working great!!
I suppose I could let Digikey know they shorted me a cap. but it would probably cost me more in shipping to get that one cap. I replaced the 2 that you said were bad and left the one by the other 2 large.
Thanks to you I just bought a monitor for less then 10 bucks!!
Thanks a bunch.. You guys work on Televisions as well?Re: HP L1740 Monitor doesn't light up
Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
Yup, I already had an account there. I order parts for my hotel TV's.
Just got the caps in yesterday, but they shorted me one cap. Everything says 3 caps, but only 2 in the bag.Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
[I]Hit quote instead of Edit....[/I]
All caps have been ordered.. Let you know by the end of the week.. (if the caps come in)Re: HP L1740 Monitor doesn't light up
[I]Hit quote instead of Edit....[/I]
All caps have been ordered.. Let you know by the end of the week.. (if the caps come in)Re: HP L1740 Monitor doesn't light up
[I]Hit quote instead of Edit....[/I]
All caps have been ordered.. Let you know by the end of the week.. (if the caps come in)Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
Ok, I'm off the Digikey.Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
The other 3 tall caps don't look like those 2.
The 2 you circled are bumped up on top. The other three are flat.Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
Sorry for the delay.. Family weekend.
Here's the pics of the board..
I've heard of the PICO fuse..
Where is that located?...Leave a comment:
-
Re: HP L1740 Monitor doesn't light up
Roger that..
I'll get the image up tonight.Leave a comment:
-
HP L1740 Monitor doesn't light up
So here's the deal.
The display will power up but you dont see anything on the screen.
But if you hold a flashlight to the screen you can see the image on the screen.
I've browsed through the forum and seen some posts about the Benq board. But it seems i don't have one of those boards. From the pics here it doesn't match what I have. The boards dont have any visual cracks or burn spots. on it.
Also the monitor had issue for awhile. The screen would be dark r if it was turned off. You would have to switch it on and off several times. You would see...Last edited by buzzstpoint; 08-19-2010, 11:07 AM.
No activity results to display
Leave a comment: