Re: 2 second to black on xerox XM3-22wB I need help please
If you are getting an all white screen, I suggest rechecking the cable connections. It is easy to miss one or not have it fully plugged in.
If that doesn't work, post back and we will try to get the Ilyama working again.[/QUOTE]
Hello again
Just an update I have not had the chance to do anymore to the xerox and have found the problem on the Ilyama, one of the connection tapes (They are a laminated celloloid type material with wires embedded) that I would normally remove...
hoppalong
Member
Last Activity: 08-07-2013, 05:57 AM
Joined: 08-14-2010
Location: London,England
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello,It was my own fault,,I found it was quite easy to remove the casings holding the ccfl's... there are two 1 top 1 bottom as you might see in previous images I think the lamps were brittle and I never seated them properly in the groove where they reside? It was the gap between the 'u' section that seemed to tight and in frustration I thumped it with my palm!!! bad move..so its my fault..I will try again when I have the lamps...
I thought as much, but I lost the plot, when I broke...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello all watching this thread, with thanks to retiredcaps
I am drawing a line under it as I have broke two lamps trying to put back the screen and also my llyama will not show images now? but the lights are on, So I have a nice winter job to solve..I am going to order more ccfl's for the xerox and see how it goes
Thanks for all your help
ArtLeave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello retiredcaps
I understand what I have to do regarding the next test
Hook up the ccfl's from the Ilyama to the xerox power board (so I am trying to put back together the xerox,,) I will have to rig extensions cables not a problem
I just have a bit off a problem at the moment though?. when I took the screen out of the xerox I thought I had images recorded to know how it all goes back together ...did I heck! They are missing. I have the glass, the lcd plastic...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
I have the ccfl's already detatched from the xerox as separate units? So no problem by putting the two screens together
I hope that makes sense
I will just unplug the Illyama leads and plug in the xerox ccfl's with a quick safety switch on/off and see what happens?
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
Yes this is the first day we have had a bit of sunshine, so I could get a decent image outside..ha! its August in glorious England,So what's new?
We have had all good weather up till now,So that's where the expression come from I suppose " It never rains until it pours"
A question? What would possibly happen If I reassemble all the bits (there everywhere at the moment) Just with 2 tubes or 3 tubes Just a thought...
A voltage overload...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello Rtech
Well they all worked using retiredcaps set-up advice! I am now going to try the next method.. ie plug them all in on the Illyama ..it only cost me a fiver and it's years old.. So in for a penny
Plus, It's the better half's and might stop her yakking Ha!
well here goes talk latter
Thank you
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
I will get set up with that,and let you know how I fair
This is an image of the pink tube
Thank you
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
Just a few more images for you to see a bit better and this is the equipment I am working with
Thank you
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
I have taken your advice and followed your instructions. I have uploaded a picture of the results of the 4 CCFL's. They all stay on for over 5 mins and so I ended the test.One of the ccfl was 15% pink at the end but still worked for the 5 min's as the other 85% was bright white as the other 3 (4 x 2mm x 475mm) So it may not be this that's causing my 2 second problem?
I have had the chance to re-photograph (in focus) the power board and also uploaded those images.The transistors/mosfets?...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
Those Instruction's make perfect sense and I understand completely
I shall get on with it and let you know the result
Thanks
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello retiredcaps
As I said to Rtech,I have a new monitor here,the same size 22". I also have a few lcd screens, all working. Would a 17" ilyana be okay to check it on?
I have read that post on #5 and understand the safety rules! regarding the HV
Are all CCFL's the same re-voltage? meaning would it hurt to hook up a 480mm ccfl to a 17" screen or is that irrelevant
I Need to read up more on this
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello Rtech
I can see the pitfalls of this sort of repair, I have OCD which makes me want to carry through what I have started.. It's either all or nothing..I understand what you mean about the tedium, Then to me I tend to thrive on it, Just to get it right or in my younger days I would kick it all up in the air and walk away ha!
I cant do that now? (Tongue in cheek) on the other hand I have purchased a new LG W2243S 22" LCD MONITOR, FULL HD, 5MS £89 jobby from fleabay so I can...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
I have managed to get to the CCFL's.. It's not to difficult a job, You just need patience and a bit of common sense.oh! and advice BTW!.. I also take pictures of each stage just in case I have a amnesia episode or have to put the job off for a while (my wife calls it a Senior moment) don't you just love them..A title for everything..now where's my glasses ha!
I will upload the images for the ccfl's and you can advise me if there duff?
I have not taken them out of...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello
I have managed to separate the (1mm gauge steel ) angled outer frame from the screen sandwich revealing the glass 3mm and that's about as far as will go tonight, My bed is calling me..I suppose its about teatime 4pm on the other side of the pond.So I will have a fresh mind in the morning and more daylight
I will have a look on utube meanwhile to take more of it in.
Once again, many thanks
hoppalong
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Hello again
Thanks very much for that link I am learning lots
hoppalong
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Thank you
I was a touch reluctant to open up the screen part. I will look at the link and have a go
I will report back later
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
I have owned this from new I bought it in March 2007 with a 3 year warrantee
Actually it was a long time dying I would leave my pc running for 20-24 hrs a day and when going to bed turn off monitor. This model also has two VGA input's and I hooked up 2 machines to it, a laptop and a pc.I then would switch between machines using the switch designed for this.
The details are
January 2007. manufacture date on back plastic cover
printed on power board is:
MO32p5071247515...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Thank you for the reply..
Regarding Pictures I will make a better job of it
I will get on to it straight away. Well tomorrow now as its almost dark here in England.I can give you the transistor info will be back soon
Thank you again
Art...Leave a comment:
-
Re: 2 second to black on xerox XM3-22wB I need help please
Thank you will do...Leave a comment:
No activity results to display
Leave a comment: