Re: Insignia NS-50D40SNA14
Is there something else I can do about this issue or it's a case of buying a new TV ?
Let me know thanks
Helisstra
Member
Last Activity: 10-05-2017, 08:03 AM
Joined: 09-07-2017
Location: Windsor
-
Re: Insignia NS-50D40SNA14
Tested them all, no one have 100 ohm or less.Leave a comment:
-
Re: Insignia NS-50D40SNA14
I have removed the frame, I don't see anything suspicious on the board. Linked picture
Is there a chance of repair at this point or it's dead since it's the LCD Panel ?
The bonding board is not replacable due to the soldered ribbon ?...Leave a comment:
-
Re: Insignia NS-50D40SNA14
Thanks I will remove the frame, later today or tomorrow to inspect the board....Leave a comment:
-
Re: Insignia NS-50D40SNA14
Here the picture of the full layout.
Yes T-Con in bottom middle
When I plug only the right ribbon, half right of the image is displayed correctly.
When I plug only the left ribbon, no image.
If I plug the right ribbon, on the left LCD, no image.
If I plug the left ribbon, on the right LCD, no image.
Plug back the right ribbon on the right LCD, half right image again.
I can do that right since both ribbon have the same P/N ?...Leave a comment:
-
Insignia NS-50D40SNA14
Hello guys,
Situation :
The top left of the TV started to do fading horizontal lines. It's like the top third of the screen, and the lines were fading to normal reaching half the screens.
The horizontal lines were NOT black, they were a different tone of colour, but you were still able to see the image correctly.
After a couples of weeks like this, the screen went greyish/black. It's not the same colour as when the TV is off. Same issue on all Input.
The sound is still working perfectly on HDMI.
The backlight are all ON.
...Last edited by Helisstra; 09-08-2017, 04:15 PM. -
Re: New Members - please post your introductions here
Want access to post, thanks.Leave a comment:
No activity results to display
Leave a comment: