Re: My 2 yo Phillips 42PFL7422D/37



Well folks, TV is working fine now, i got 2 boards from "ShopJimmy.com" a master and slave board set for $151 delivered, ebay was not much less, replaced both board, however did them 1 at a time, the slave board was bad, visual inspection nothing obvious, replaced them both. Now i have a known good master inverter board, and a bad slave board. I have to commend the information and help i got from THIS web site. Thank you to all the comments, my $800 tv was brought back to life, with a $150 dollar investment. Thank you....

Re: 42PFL7422D/37 Service Manual Needed

Well, i will take the meter to the boards and then make a decision on buying the boards or changing the chips.
Jet

Re: My 2 yo Phillips 42PFL7422D/37



Nice site, i got a manual and i will go to work with the meter i believe it's one ot the backlight pwr supplies.
Thanks for the direction.
Jet...

Ok, came home, turned on, no picuture, but have sound, so i snoop around on your website, find out a few things, look at all the boards, they don't have any obvious burn marks, however with the back off i turn on the unit with the cover off, the master inverter on the left above the unit show up, and the one on the right does nothing, so i figure i need to change them both. i just want to plug in something on the video out to test the video process on the set. Any other tips or hints or where i can find the manual for this wonderful set i would be most apprciative.
Thanks guys for a wonderful...

Re: 42PFL7422D/37 Service Manual Needed



Keep them both....
Jet...

Re: New Members - please post your introductions here

Hey Folks, Hello to all, i am Jetfixxr, Jet for short, 46, Airline maintenance supervisor, i stumbled along this site looking for a fix for my 42" LCD 2 yrs old and no picture. Very nice site and informative. I like this. Once again hello to everybody...
Jet.