Re: Dell e171fpb monitor no power or LED lights
Well, none of the others pins puts out anything....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Dell e171fpb monitor no power or LED lights
OK, don't know if this is of any help, but I checked for voltage across the IC601 and I'm getting 13.7vdc between pin-6 and all the other pins.
Just so you know I also check voltage on the Transformer (T601) and I'm reading 165vdc on all 4 pins on the bottom side and nothing on the upper side.
If you are able... see picture....
Leave a comment:
-
Re: Dell e171fpb monitor no power or LED lights
I tried, but unfortunately this camera above 640x480 becomes blurred.
This board is made by BENQ and the part number is; BENQ ETL-XPC-801.
How should I test the SMPS CONTROLLER as you suggested, that one is labeled IC601.
I thank you both for your patience and help
Don't worry about me getting shocked, I am an industrial electrician by trade and I have had received several....
Leave a comment:
-
Re: Dell e171fpb monitor no power or LED lights
Thank you,
There's only one fuse, and is good, I've read 125v, 0.3ohms across it as you stated.
I' ll check the "rectifier"
The pictures... (sight) that's almost the best I can get out this cheap camera.
Thank you again...Last edited by miamiflorida; 08-11-2010, 11:43 PM.
Leave a comment:
-
Dell e171fpb monitor no power or LED lights
Hello Guys,
My Dell e171fpb after a brief power outage won't power up at all, none of the LED lights on the front will lid, power button will not turn it on at all.
I have opened the monitor, it looks like all of the A/C section of the PSU is fine, checked all the capacitors and they seems to be OK, no visible crack, burns or anything obvious.
Now i can't get any voltage out on either of the two connectors going out of the power supply board.
See the attached pictures.
Please any help is greatly appreciated, Thank y...
No activity results to display
Show More
Leave a comment: