Hi got exactly two same motherboards with this issue one had short on 3v ldo and 3vs line after replacing kbc edp mux and usb c pd controler board start but shuts off after 20-30sec , second same board cpu was dead ( No cristal oscilation) replaced cpu and same story laptop starts shows pictures can enter bios but again shutdown after about 30sec....
Did you menage to sort this out?
barakuda123
Member
Last Activity: 06-03-2025, 03:57 AM
Joined: 08-14-2017
Location: london
-
Re: HP ProBook 440 G9 need bios + ec
Thanks unfortunately no change.
I believe ec bios is corrupted
Maybe someone got working 450 g9 working machine and can upload main + ec dumpLeave a comment:
-
HP ProBook 440 G9 need bios + ec
Description : HP ProBook 440 G9
Serial Number : 5CD2268075
Product Number : 5Y4A2EA
cpu i5 1235u
need bios spi rom 32mb + ec rom 32mb
motherboard quanta DAX8SFMB8B1 REV:B
attaching orginal bios rom + ec rom...Last edited by Vesko356; 04-12-2023, 07:19 AM. Reason: Title edit. Wrong model description. Serial number added. -
Need recommendations!! Bga rework station up to 1000£
Hi guys can you recommend good and reliable
Bga station up to 1000 pounds
I will be fixing laptop mostly
So something sutable for pch gpu cpu and hybrid cpu reball and replacement
Thanks in advance -
Re: Dell xps 9560 la-e331p dead
Hi after removing uh7 still no voltage on pin 1 or pin 2(pch_pltrst#) on this board its rd31 i believe you asking for ddr4_dramrst# and h_dramrst# when i power up the board voltage jums for 0.5 sec to 50mili volts than down to zero...Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
Can you please share where? Already paid few times for 9569 schematics and it always turned out to be 9550 (vinafix)...i will be happy to pay for 9560 la-e331p schematic...Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
[QUOTE=Weelcup;988959]
This is schematics for dell xps 9550.....very similar to dell 9560 but that's no power up sequence thats why I'm using power sequence from 9570
Dell 9550 =la-c361p
Dell 9560 =la-e331p
Dell 9579 =la-g341pRe: Dell xps 9560 la-e331p dead
[QUOTE=Weelcup;988959]
This is schematics for dell xps 9550.....very similar to dell 9560 but that's no power up sequence thats why I'm using power sequence from 9570
Dell 9550 =la-c361p
Dell 9560 =la-e331p
...Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
[QUOTE=techtiger;988930]
There's no schematics for 9560 only for 9550 and 9570 There's a boardview for 9560 tho
I'm just combining all 3
Power sequence os from 9570 tho most if not all start up signals are the sameRe: Dell xps 9560 la-e331p dead
[QUOTE=techtiger;988930]
There's no schematics for 9560 only for 9550 and 9570 There's a boardview for 9560 tho
I'm just combining all 3
Power sequence os from 9570 tho most if not all start up signals are the sameRe: Dell xps 9560...Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
[QUOTE=barakuda123;988851]Hi aftet more measurements
PCH_PLTRST#_EC missing this is probably last signal before vcc_core
On Uh7
I've got
Pin 1 PCH_PLTRST# -0v
Pin 2 PCH_PLTRST#-0v
Pin 4 PCH_PLTRST#ec -0v
This signal comes directly from pch ....can I inject 3.3v from other source on pin 1,2 UH7 and power on board??? Will this be safe?Re: Dell xps 9560 la-e331p dead
[QUOTE=barakuda123;988851]Hi aftet more measurements
PCH_PLTRST#_EC missing this is probably last signal beforeLeave a comment:
-
Re: Dell xps 9560 la-e331p dead
Hi aftet more measurements
PCH_PLTRST#_EC missing this is probably last signal before vcc_core
On Uh7
I've got
Pin 1 PCH_PLTRST# -0v
Pin 2 PCH_PLTRST#-3.3v
Pin 4 PCH_PLTRST#ec -0v
Im little confused why pin 1 and 2 got same name but are not connected (diode mode)
Can i connect pin 1 and pin 2 and try to power up the board???...Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
I have replaced isl95829a once again and fb_a signal is missing from cpu .....resistance in this line ok
No communication with cpu?? Dead cpu??Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
if i remove jumper pjp701 and pjp 702 same reaction but takes less amp 0.15 due to this line off but board behave the same...Leave a comment:
-
Re: Dell xps 9560 la-e331p dead
Where i can Measure these signals?...Leave a comment:
-
Dell xps 9560 la-e331p dead
Dell xps 9560
La-e331p (schematics only available for dell xps 9550 la-361p)
Similar but vram different
hi laptop not working
When motherboard powered on it takes 0.25 amp for about 3 sec then goes back to 0.001
When at 0.25 amp
3.3v ok
5v ok
1.2v ram ok
1.0v pch ok
0.9v cpu vccio ok
1.0v cpu sa ok
1.3v gpu ddr ok
No voltage on pl 1200,pl 1201.1202(cpu vcc core)
No short detected anywhere
Problem appears to be in isl95829a
No pwm vcore1a,1b,1c
And fccm core only 2v... -
Re: New Members - please post your introductions here
hi guys need helpLeave a comment:
No activity results to display
Leave a comment: