Re: Vizio E500I-B1 : Power Supply Board Repair - 715g6100-p04-003-002h

Thanks so much!! I couldn't find a clear enough picture of the back to see the writing.

I am troubleshooting why my TV will not turn on. It has been turning off randomly and now it will not power on. I believe I have traced the problem to be a bad Integrated Circuit on the power supply as well as a couple resistors connected to the IC. In my research i found that the IC9301 is what is responsible for the 5vdc standby power. I do not have 5vdc on the standby power terminals. So I am receiving a new IC from digikey today that I am going to install. However on the back of the board there are the two resistors that are connected to pin 1 of IC9301. Unfortunately I haven't been able to...

Re: Vizio E500i-B1

Hey Looking for a little bit of help. I am working on fixing my PCB. I have identified my problem as the IC 9301, but there are a couple of resistors near this IC on the back of the board that also fried. They are the two resistors that are tied to pin 1 of IC9301. Unfortunately I haven't been able to find a schematic or even a picture of the back of the board that would show me what value of resistor i need to get to repair it. Does Someone have this info?