Re: Telefunken te32843 b17
at the beginning i had only the red flashing led then i tried it with a firmware of the card but not the telefunken and something is improved in the way the leds turn on for this i would like to have a suitable firmware for this card
enricocite
Member
Last Activity: 10-20-2017, 12:18 PM
Joined: 08-02-2017
Location: italia
-
Re: Telefunken te32843 b17
yess....Leave a comment:
-
Re: Telefunken te32843 b17
yes i don't have a image but the backlights yes....Leave a comment:
-
Telefunken te32843 b17
Good morning, I have a TV with the problem that the audio feels but the video no, I understand the problem is the firmware. The TV has a 17mb60-4.1 card I wanted to know if it was the firmware to start the TV through usb
Thanks so much -
Re: Samsung PS-50Q96HD not start
the code of ysus is lj41-05120aLeave a comment:
-
Re: Samsung PS-50Q96HD not start
I think the problem is in ysus because tensions 17 and 21 are no less than the others but they are all the same. Where can I find a YSUS used at a good price?Leave a comment:
-
Re: Samsung PS-50Q96HD not start
Then the audio works I checked the tensions in the ysus but did not match those dates. I think the problem is ...
The tensions 17 and 21 that should be lower than the others are the same.
When I unplug the connector from the other board and leave only the power supply there are no voltagesLast edited by enricocite; 08-05-2017, 05:06 AM.Leave a comment:
-
Re: Samsung PS-50Q96HD not start
But there is no program that with the firmware cable can give me an indication of what does not go?Leave a comment:
-
Samsung PS-50Q96HD not start
Good evening, first I apologize for my english I'm an italian technician I have the samsung tv in the object that when I turn it on I hear the relay click, the blinking light flashes 7 and then stays on but the TV does not sound a life of sound No video. Today I tried to do the firmware update and it was only fine that at the end of the TV reboot I made a mistake.
I wanted to know if something was happening to someone, what a problem it could have and how to get into the service menus to do a hard reset.
The power supply voltages are correct ... at... -
Re: New Members - please post your introductions here
Good evening, I'm an Italian technician and I apologize for my English I'm using and I will use from here on
Good evening at allLeave a comment:
No activity results to display
Leave a comment: