Re: help with gteway gt4016 caps
i could only get 6 and the board has ten so i was just going to replace the ones on that line or whatever it maybe called they have numbers printed on the board next to them so i was going to replace the ones with the same number until i can get more of them
djdaredevil
New Member
Last Activity: 08-03-2010, 06:22 PM
Joined: 08-01-2010
Location:
-
Re: help with gteway gt4016 caps
they look just like solids but they had vents in the top and one was leaking so im going to replace all the ones on that line
can i replace the lytics with solids cause thats what i ordered found some of the exact same values...Leave a comment:
-
Re: help with gteway gt4016 caps
thanks for the help guys i just have never had to change one of the solid aluminum ones before so i didnt know which ones to get.
really glad you guys could help meLeave a comment:
-
Re: help with gteway gt4016 caps
couldnt find the edit button but i stare at this thing under a magnifying glass and the j (4j) could be a v if you rotate the cap a littleLeave a comment:
-
help with gteway gt4016 caps
i have a customers gateway that i have already diagnosed to a bad cap the problem is i cant figure out what kind or ratings it is.
its about 6-7mm high and 10mm around they are aluminum with just a little part on the top thats black the only markings on it are not that clear but it looks like it says 50 (or 5D)
680
4J the j is really small print
i would really appreciate the help
No activity results to display
Leave a comment: